Brian: Thanks for the pointers. I will go read up on it.
Thanks, --- Graham == On Fri, Mar 27, 2015 at 7:06 PM, Brian Anderson <b...@nwlink.com> wrote: > Since you are using Jessie images, have you tried using ConnMan to manage > the WiFi connection rather than resorting to all of this systemd and > ifup/ifdown stuff? > > You can configure ConnMan using the "connmanctl" command line utility, or > via the "cmst" GUI utility. to setup your link (ssid, credentials). Or, > you can create a config file and put it in > /var/lib/connman/my_config.config. There is documentation in the ConnMan > source tree on this format. I've also attached a template for reference. > You might also consider adding '/etc/connman/main.conf' and specify > PreferredTechnologies in the order that you want. Again, there is > documentation in the ConnMan source tree on this file, and also the Google > will help. > > Note that if you use this method, you should NOT do any wifi configuration > in /etc/network/interfaces as ConnMan will override these. If you would > rather use /etc/network/interfaces, then be careful that you don't also > have conflicting configuration setup with ConnMan, as ConnMan will override > configuration in /etc/network/interfaces. > > I use the ConnMan method all the time for my work and have no problem > getting a WiFi connection after boot using my TP-Link TL-WN-722N (uses an > Atheros chipset), Jessie snapshot images, and 3.19.x kernels. > > ba > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/rRHUR8mltmg/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.