On 13 November 2015 at 17:49, Robert Nelson <[email protected]> wrote:
> Yeah good point. ;) > > root@beaglebone:~# uname -r ; ls -l > /sys/devices/system/cpu/cpu0/cpuidle/state0/ > 4.1.13-ti-r29.4 > total 0 > -r--r--r-- 1 root root 4096 Nov 13 17:46 desc > -rw-r--r-- 1 root root 4096 Nov 13 17:46 disable > -r--r--r-- 1 root root 4096 Nov 13 17:46 latency > -r--r--r-- 1 root root 4096 Nov 13 17:46 name > -r--r--r-- 1 root root 4096 Nov 13 17:46 power > -r--r--r-- 1 root root 4096 Nov 13 17:46 residency > -r--r--r-- 1 root root 4096 Nov 13 17:46 time > -r--r--r-- 1 root root 4096 Nov 13 17:46 usage > > https://github.com/RobertCNelson/ti-linux-kernel-dev/commit/7df6a18cbcd567712edd1e1a4a774742d510dbe3 [same message again, now to the mailing list] I did apt-get install linux-image-4.1.13-ti-r30 It installed fine. Apt suggested that I install a firmware package (with 4.1.13-ti-r30 in the name). I did that - maybe I should not, it was the first time I installed a firmware package on the BBB. Anyway, now the BBB does not boot. I have been doing all my work using a MicroSD card. The log is below. Basically the boot process does not complete, and I see the asterisks at the last line moving right and left and the time in seconds being incremented continuously on the line "A start job is running for LSB:". My previous kernel, that worked very well, was 4.1.10-bone16. Any ideas? ------------------------------------------------------------- U-Boot SPL 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29) reading args spl_load_image_fat_os: error reading image args, err - -1 reading u-boot.img reading u-boot.img U-Boot 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29) I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 mmc0 is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 0 1179 bytes read in 8 ms (143.6 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... 1661 bytes read in 36 ms (44.9 KiB/s) debug: [/boot/vmlinuz-4.1.13-ti-r30] ... 8260280 bytes read in 503 ms (15.7 MiB/s) debug: [/boot/initrd.img-4.1.13-ti-r30] ... 4506906 bytes read in 304 ms (14.1 MiB/s) debug: [/boot/dtbs/4.1.13-ti-r30/am335x-boneblack.dtb] ... 59295 bytes read in 71 ms (815.4 KiB/s) debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p1 rootfstype=ext4 rootwait coherent_pool=1M quiet] ... debug: [bootz 0x82000000 0x88080000:44c51a 0x88000000] ... Kernel image @ 0x82000000 [ 0x000000 - 0x7e0ab8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801179e Starting kernel ... [ 3.371127] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle [ 3.744796] omap-sham 53100000.sham: initialization failed. [ 3.767060] cpu cpu0: cpu0 clock notifier not ready, retry [ 3.908242] bone_capemgr bone_capemgr: slot #0: No cape found [ 3.968235] bone_capemgr bone_capemgr: slot #1: No cape found [ 4.028233] bone_capemgr bone_capemgr: slot #2: No cape found [ 4.088234] bone_capemgr bone_capemgr: slot #3: No cape found Loading, please wait... fsck from util-linux 2.25.2 rootfs: recovering journal rootfs: clean, 37364/466560 files, 331056/1955328 blocks [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ 13.815623] systemd[1]: Failed to start Load Kernel Modules. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started LSB: controls configuration of serial ports. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started udev Coldplug all Devices. Starting Load/Save Random Seed... Mounting FUSE Control File System... Mounting Configuration File System... Starting Apply Kernel Variables... Starting Create Static Device Nodes in /dev... [ OK ] Listening on Syslog Socket. Starting Journal Service... [ OK ] Started Journal Service. [ OK ] Mounted Configuration File System. [ OK ] Mounted FUSE Control File System. [ OK ] Started Load/Save Random Seed. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Reached target Local File Systems (Pre). Mounting /sys/kernel/debug... [ OK ] Started udev Kernel Device Manager. [ OK ] Mounted /sys/kernel/debug. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... [ OK ] Reached target Remote File Systems. Starting Trigger Flushing of Journal to Persistent Storage... Starting LSB: controls configuration of serial ports... Starting LSB: Raise network interfaces.... Starting Copy rules generated while the root was ro... [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Copy rules generated while the root was ro. [ 15.036404] Unable to handle kernel paging request at virtual address fee00005 [ 15.043713] pgd = ddba0000 [ 15.046439] [fee00005] *pgd=00000000 [ 15.050053] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 15.055400] Modules linked in: [ 15.058489] CPU: 0 PID: 219 Comm: setserial Not tainted 4.1.13-ti-r30 #1 [ 15.065231] Hardware name: Generic AM33XX (Flattened Device Tree) [ 15.071362] task: ddba7480 ti: ddb9c000 task.ti: ddb9c000 [ 15.076810] PC is at io_serial_in+0x28/0x38 [ 15.081029] LR is at serial8250_do_startup+0xd0/0x668 [ 15.086113] pc : [<c05f2a3c>] lr : [<c05f6580>] psr: 400f0013 [ 15.086113] sp : ddb9dd00 ip : ddb9dd10 fp : ddb9dd0c [ 15.097659] r10: dcde20f4 r9 : 00000001 r8 : ddc84b5c [ 15.102915] r7 : ddc84a00 r6 : 00000000 r5 : c10766c0 r4 : c107658c [ 15.109481] r3 : 00000000 r2 : 00000000 r1 : fee00005 r0 : c107658c [ 15.116049] Flags: nZcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 15.123228] Control: 10c5387d Table: 9dba0019 DAC: 00000015 [ 15.129008] Process setserial (pid: 219, stack limit = 0xddb9c218) [ 15.135226] Stack: (0xddb9dd00 to 0xddb9e000) [ 15.139614] dd00: ddb9dd3c ddb9dd10 c05f6580 c05f2a20 00000000 c107658c dcde20f4 00000000 [ 15.147867] dd20: ddc84a00 ddc84b5c 00000001 dcde20f4 ddb9dd4c ddb9dd40 c05f6b44 c05f64bc [ 15.156117] dd40: ddb9dd74 ddb9dd50 c05f1c48 c05f6b24 c107658c ddb9de24 c0ecd54c 00000000 [ 15.164366] dd60: dcde20f4 00000000 ddb9de1c ddb9dd78 c05f2118 c05f1bc8 c0021cb0 00000000 [ 15.172616] dd80: 00000000 00000000 00000000 00000001 ddc84a00 00000000 00000bb8 00000000 [ 15.180865] dda0: 00000032 00000000 ddb9ddcc ddb9ddb8 c014b2cc c014bbc8 00000042 00000001 [ 15.189114] ddc0: ddb9de24 ddb9ddd0 c014bbc8 c00a7a84 00000000 00000000 000000dd 00000000 [ 15.197364] dde0: dc1572f0 b6e70000 ddb9de0c dc8ba30d 00000080 0000541f ddc84a00 dcde20f4 [ 15.205613] de00: beb1dc78 beb1dc78 ddc84a80 dcde2190 ddb9de8c ddb9de20 c05f2348 c05f1d64 [ 15.213862] de20: c0177bfc 00000001 00000001 00000000 000000b4 00000000 00000000 00000000 [ 15.222112] de40: 002dc6c0 00000032 00000000 00000bb8 00000000 00000000 00000000 00000000 [ 15.230362] de60: 00000033 ddc84a00 0000541f c0ecd54c beb1dc78 ddc2eb80 00000000 00000000 [ 15.238612] de80: ddb9df1c ddb9de90 c05d26c8 c05f229c dcf3b778 c09b695c ddb9defc ddb9dea8 [ 15.246862] dea0: c09b695c c008d7ec ffffff9c c0010be4 ddb9c000 00000000 ddb9df4c ddb9dec8 [ 15.255112] dec0: c01b0fd0 00000000 00000000 00000000 c00707a0 c0ed3ec4 00000007 c09b6808 [ 15.263361] dee0: b6e79b60 ddb9dfb0 beb1de6c beb1de6c ddb9dfac dc8ba30d ddad93e8 beb1dc78 [ 15.271610] df00: ddc2eb80 beb1dc78 0000541f 00000003 ddb9df7c ddb9df20 c01b3868 c05d230c [ 15.279860] df20: 00000020 00000000 ddb9df4c ddb9df38 c01b0454 c0190c18 00000000 00000003 [ 15.288110] df40: ddb9df94 ddb9df50 c01a0134 c01b03ec 00000000 00000000 00000000 ddc2eb80 [ 15.296360] df60: ddc2eb80 beb1dc78 0000541f 00000003 ddb9dfa4 ddb9df80 c01b3ad4 c01b345c [ 15.304610] df80: 00014130 00014130 00014148 00000036 c0010be4 ddb9c000 00000000 ddb9dfa8 [ 15.312860] dfa0: c0010a40 c01b3a64 00014130 00014130 00000003 0000541f beb1dc78 00000000 [ 15.321109] dfc0: 00014130 00014130 00014148 00000036 00000000 beb1de88 beb1de84 000140b0 [ 15.329359] dfe0: 00014038 beb1dc24 00009a2f b6ecaed6 600f0030 00000003 f8df096f 3c058268 [ 15.337631] [<c05f2a3c>] (io_serial_in) from [<c05f6580>] (serial8250_do_startup+0xd0/0x668) [ 15.346152] [<c05f6580>] (serial8250_do_startup) from [<c05f6b44>] (serial8250_startup+0x2c/0x30) [ 15.355106] [<c05f6b44>] (serial8250_startup) from [<c05f1c48>] (uart_startup.part.4+0x8c/0x19c) [ 15.363971] [<c05f1c48>] (uart_startup.part.4) from [<c05f2118>] (uart_set_info+0x3c0/0x538) [ 15.372486] [<c05f2118>] (uart_set_info) from [<c05f2348>] (uart_ioctl+0xb8/0x4fc) [ 15.380133] [<c05f2348>] (uart_ioctl) from [<c05d26c8>] (tty_ioctl+0x3c8/0xcd8) [ 15.387517] [<c05d26c8>] (tty_ioctl) from [<c01b3868>] (do_vfs_ioctl+0x418/0x608) [ 15.395071] [<c01b3868>] (do_vfs_ioctl) from [<c01b3ad4>] (SyS_ioctl+0x7c/0x8c) [ 15.402457] [<c01b3ad4>] (SyS_ioctl) from [<c0010a40>] (ret_fast_syscall+0x0/0x3c) [ 15.410101] Code: e5903004 e0831211 e7f31051 e2411612 (e5d10000) [ 15.416248] ---[ end trace 82e1a45a988079c0 ]--- [ OK ] Started Trigger Flushing of Journal to Persistent Storage. Starting Network Time Synchronization... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Time Synchronization. [ OK ] Reached target System Time Synchronized. [ OK ] Found device /dev/ttyS0. [ 16.375892] tda998x 0-0070: Falling back to first CRTC [ 16.562027] tda998x 0-0070: found TDA19988 [ 16.605400] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops [tda998x]) [ 16.641416] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 16.648141] [drm] No driver support for vblank timestamp query. [ 16.732655] tilcdc 4830e000.lcdc: No connectors reported connected with modes [ 16.807982] [drm] Cannot find any crtc or sizes - going 1024x768 [ 16.830045] davinci_evm sound: hdmi-hifi <-> 48038000.mcasp mapping ok [ 16.877716] Console: switching to colour frame buffer device 128x48 [ 16.965679] tilcdc 4830e000.lcdc: fb0: frame buffer device [ 16.995317] tilcdc 4830e000.lcdc: registered panic notifier [ 17.048452] [drm] Initialized tilcdc 1.0.0 20121205 on minor 0 [ 17.070512] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20 [ 17.097326] pruss-rproc 4a300000.pruss: 8 PRU interrupts parsed [ 17.116501] pruss-rproc 4a300000.pruss: memory dram0: pa 0x4a300000 size 0x2000 va e09c4000 [ OK ] Reached target Sound Card. [ 17.168495] pruss-rproc 4a300000.pruss: memory dram1: pa 0x4a302000 size 0x2000 va e09cc000 [ 17.177345] pruss-rproc 4a300000.pruss: memory shrdram2: pa 0x4a310000 size 0x3000 va e09d0000 [ 17.200058] pruss-rproc 4a300000.pruss: memory intc: pa 0x4a320000 size 0x2000 va e09d4000 [ 17.209321] pruss-rproc 4a300000.pruss: memory cfg: pa 0x4a326000 size 0x2000 va e09d8000 [ 17.220411] pruss-rproc 4a300000.pruss: creating platform devices for PRU cores [ 17.233880] pru-rproc 4a334000.pru0: memory iram: pa 0x4a334000 size 0x2000 va e09dc000 [ 17.242676] pru-rproc 4a334000.pru0: memory control: pa 0x4a322000 size 0x400 va e0876000 [ 17.253170] pru-rproc 4a334000.pru0: memory debug: pa 0x4a322400 size 0x100 va e09c2400 [ 17.263052] remoteproc1: 4a334000.pru0 is available [ 17.268686] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 17.277822] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 17.291408] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2 [ 17.302902] remoteproc1: failed to load am335x-pru0-fw [ 17.311446] pru-rproc 4a334000.pru0: booting the PRU core manually [ 17.321673] remoteproc1: powering up 4a334000.pru0 [ 17.329964] remoteproc1: Direct firmware load for am335x-pru0-fw failed with error -2 [ 17.341146] remoteproc1: request_firmware failed: -2 [ 17.349388] pru-rproc 4a334000.pru0: rproc_boot failed [ 17.357468] remoteproc1: releasing 4a334000.pru0 [ 17.366298] pru-rproc: probe of 4a334000.pru0 failed with error -2 [ 17.375900] pru-rproc 4a338000.pru1: memory iram: pa 0x4a338000 size 0x2000 va e09e0000 [ 17.388501] pru-rproc 4a338000.pru1: memory control: pa 0x4a324000 size 0x400 va e09e4000 [ 17.399763] pru-rproc 4a338000.pru1: memory debug: pa 0x4a324400 size 0x100 va e09e6400 [ 17.412654] remoteproc1: 4a338000.pru1 is available [ 17.420837] remoteproc1: Note: remoteproc is still under development and considered experimental. [ 17.432949] remoteproc1: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed. [ 17.446616] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2 [ 17.457806] remoteproc1: failed to load am335x-pru1-fw [ 17.466123] pru-rproc 4a338000.pru1: booting the PRU core manually [ 17.476113] remoteproc1: powering up 4a338000.pru1 [ 17.484180] remoteproc1: Direct firmware load for am335x-pru1-fw failed with error -2 [ 17.495171] remoteproc1: request_firmware failed: -2 [ 17.503189] pru-rproc 4a338000.pru1: rproc_boot failed [ 17.512072] remoteproc1: releasing 4a338000.pru1 [ 17.520085] pru-rproc: probe of 4a338000.pru1 failed with error -2 [ *** ] (1 of 3) A start job is running for LSB: controls co...15s / no limit)[ 29.688255] random: nonblocking pool is initialized [* ] (1 of 3) A start job is running for LSB: controls co...42s / no limit)o** ] (2 of 3) A start job is running for[LSB: Raise netwo[ TIME ] Timed out waiting for device dev-ttyGS0.device. [DEPEND] Dependency failed for Serial Getty on ttyGS0. [ *** ] (1 of 2) A start job is running for LSB: controls co...16s / no limit)g*** ] (1 of 2) A start job is runnin[ for LSB: controls co[ **] (1 of 2) A start job is running for LSB: controls co... 3s / no limit)[ 197.907922] net eth0: initializing cpsw version 1.12 (0) [ ***] (1 of 2) A start job is runnin[ 197.921424] net eth0: phy found : id is : 0x7c0f1 g for LSB: controls co... 4s / no limit)[ 197.944942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ OK ] Started LSB: Raise network interfaces.. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. [ 200.998945] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 201.009928] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ *** ] A start job is running for LSB: controls configurati... 1s / no limit) -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
