On Mon, Nov 16, 2015 at 9:39 AM, Taceant Omnes <[email protected]> wrote: > On 16 November 2015 at 15:20, Robert Nelson <[email protected]> wrote: > >>> My previous kernel, that worked very well, was 4.1.10-bone16. >>> >>> Any ideas? >> >> What rootfs and distro? >> >> cat /etc/dogtag > > This is from a previous email, as now it does not boot: > > root@beaglebone:~# cat /etc/dogtag > BeagleBoard.org Debian Image 2015-09-13
I don't have that version local, but i do have the week after: debian@beaglebone:~$ cat /etc/dogtag BeagleBoard.org Debian Image 2015-09-20 https://paste.debian.net/333066/ That leaves: u-boot? yours: U-Boot SPL 2014.04-00015-gb4422bd (Apr 22 2014 - 13:24:29) What shipped with 2015-09-20: (based on the build date, 2015-09-13 had the same version) U-Boot SPL 2015.10-rc3-00001-gfb375b5 (Sep 10 2015 - 10:07:48) bad magic U-Boot 2015.10-rc3-00001-gfb375b5 (Sep 10 2015 - 10:07:48 -0500), Build: jenkins-github_Bootloader-Builder-222 Watchdog enabled I2C: ready DRAM: 512 MiB Reset Source: Global warm SW reset has occurred. Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... reading uEnv.txt 1179 bytes read in 5 ms (229.5 KiB/s) gpio: pin 55 (gpio 55) value is 1 Loaded environment from uEnv.txt Importing environment from mmc ... Checking if uenvcmd is set ... gpio: pin 56 (gpio 56) value is 1 Running uenvcmd ... 1661 bytes read in 39 ms (41 KiB/s) debug: [/boot/vmlinuz-4.1.13-ti-r30] ... 8260280 bytes read in 497 ms (15.9 MiB/s) debug: [/boot/initrd.img-4.1.13-ti-r30] ... 4414791 bytes read in 290 ms (14.5 MiB/s) debug: [/boot/dtbs/4.1.13-ti-r30/am335x-boneblack.dtb] ... 59295 bytes read in 72 ms (803.7 KiB/s) debug: [console=tty0 console=ttyO0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait fixrtc coherent_pool=1M quiet] ... debug: [bootz 0x82000000 0x88080000:435d47 0x88000000] ... Kernel image @ 0x82000000 [ 0x000000 - 0x7e0ab8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Using Device Tree in place at 88000000, end 8801179e So what happens when you force it to boot with the microSD, thus forcing the 2015.10-rc3 u-boot? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
