How did you compile the assembly code? The compilation has to be done with the Remoteproc and linker files. Remoteproc will look for certain code in the firmwares, and if it is not there, nothing will happen.
On Friday, November 18, 2016 at 10:06:07 AM UTC-5, Zach B wrote: > > In trying to test my code for the PRUs is there a good way to check and > see if binary is being loaded into the PRU properly and check whether or > not it is executing. I have a simple LED circuit running some basic blink > code but nothing seems to be occurring. Also with everything activated, the > pru_rproc running and the devices showing up as they should I still > sometimes get "no such device" when I try to bind pru0, have you ever run > into this issue? > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/580caab2-8fa1-473f-ad62-7a223fb0d53f%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
