On Thu, Dec 15, 2016 at 8:40 PM, Jay Doobie <[email protected]> wrote:
> Sadly this did not work. I'm using the default kernel/setup from the > image bone-debian-8.6-lxqt-4gb-armhf-2016-11-06-4gb.img.xz > <https://debian.beagleboard.org/images/bone-debian-8.6-lxqt-4gb-armhf-2016-11-06-4gb.img.xz>. > It uses kernel 4.4.30-ti-r64. Is there something better to start with? I'd > like something newer than the 2012 build I previously had. > If that did not work, then you're doing something wrong, or you missed a step. But you can not just do what Greg suggested and have it work. You need to make sure you either replace the exact board file you load at boot, or change the board file that loads at boot. Anyway, I know what Greg suggest works, because I was the first person on the list to test the changes, on the list. Once Robert posted to the list about these changes. In fact, if you search my username on this google group, with the additional keyword "uio_pruss", it probably won't take you long to find the exact steps post I made. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORrSmP03%2BmBuLpFqiDc%3DYFaNaqUKqd92xM_55%2BFb_3Ub9A%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
