Hi TJF: is there some place I can find more info on the DT's across kernels? I'm using 4.4.30-ti-r64. I have access to the PRU, and I think my DT isn't updating anything (even though it seems to install properly). My DT can be seen here:
https://github.com/doobie42/OpenPegasus/blob/master/dto/openpegasus-00A0.dtsi Thanks, Jason On Friday, December 16, 2016 at 11:06:35 AM UTC-5, TJF wrote: > > Hello Jay! > > You need not adapt the device tree when you use a bone kernel. (The device > tree fixup is for TI kernels only.) > > Am Freitag, 16. Dezember 2016 05:44:26 UTC+1 schrieb Jay Doobie: >> >> I figured out what happened, it wasn't am335x-boneblack.dts, but >> am335x-boneblack-wireless.dts. Seems like I can talk to the PRU, but I >> don't see it doing what it should be doing. Need to grab a copy of >> prudebug and see if I can debug what the PRU is trying to do vs. is doing. >> > > PRU software is independant from the kernel. Once the driver is loaded > accordingly, all should work. (Exept the PWM outputs of the eHRPWM modules > in the PWMSS subsystems.) > > Regards > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/62ff2009-8a84-49d7-b8e4-b71f2bdd3867%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
