You have opkg . . . On Sat, May 13, 2017 at 12:23 PM, acheesehead <[email protected]> wrote:
> Neither command exists on my system. Nor is it connected to the Internet. > I am connected directly to my laptop with an Ethernet cable. I have the > Chipsee 7" display and installed the Angstrom image on the DVD that came > with the display. I did reboot. > > On Saturday, May 13, 2017 at 1:12:14 PM UTC-6, William Hermans wrote: >> >> What does this show for your system ? >> root@wgd:~# apt-cache search firmware-ralink >> firmware-ralink - Binary firmware for Ralink wireless cards >> >> And if that shows what does: >> root@wgd:~# dpkg -l | grep ralink >> >> Show for you ? It does not return anything for me, but I also do not have >> a realtech wifi adapter installed either . . . Anyway, if you show that >> package available through apt-cache search( run apt-get update first ), and >> dpkg does not report it as install. Install that package *MAYBE* needs a >> reboot, then run ifconfig again. >> >> On Sat, May 13, 2017 at 12:02 PM, Todd Peterson <[email protected]> >> wrote: >> >>> I have a BBB running Angstrom 3.8.13. I have a Realtek USB Wifi, lsusb >>> shows >>> Bus 002 Device 004: ID 0bda:818b Realtek Semiconductor Corp. >>> I put 8192cu.ko in /lib/modules/3.8.13-00720-g4202df2-dirty >>> I did insmod 8192cu.ko >>> lsmod shows >>> Module Size Used by >>> 8192cu 445685 0 >>> >>> dmesg shows [ 6.699120] usbcore: registered new interface driver >>> rtl8192cu >>> >>> The interface does not show up with ifconfig >>> >>> What am I missing? >>> >>> Thanks in advance, >>> Todd >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit https://groups.google.com/d/ms >>> gid/beagleboard/CAMSLvQzXLoBvLDVRrA17BmmKUPyWqzi0dzT3G6kwd4B >>> wVraLmg%40mail.gmail.com >>> <https://groups.google.com/d/msgid/beagleboard/CAMSLvQzXLoBvLDVRrA17BmmKUPyWqzi0dzT3G6kwd4BwVraLmg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/83fa9cc6-4c65-468e-bf64-9cdd59615421%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/83fa9cc6-4c65-468e-bf64-9cdd59615421%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORobtQ-b32Tt2Oz5ex0Bw_N-V4KRX5%3DzHQCPGoo8s5%3DJAg%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
