5V, 3A wall wart. On Saturday, May 13, 2017 at 5:14:15 PM UTC-6, William Hermans wrote: > > Todd, how are you powering your board ? Hopefully not via USB . . . > > On Sat, May 13, 2017 at 4:10 PM, acheesehead <[email protected] > <javascript:>> wrote: > >> Yes, small dongle. It is plugged into a powered USB hub. Disabled HDMI in >> uEnv.txt. Rebooted and still no joy. >> >> I tried the Debian image on the Chipsee DVD earlier today and no luck >> there either, but could easily switch back to that. Other choices on the >> DVD include Linux-EZSDK and Android. I would welcome any suggestions for >> other OS's that support the Chipsee 7" display cape. >> >> On Saturday, May 13, 2017 at 3:29:19 PM UTC-6, RobertCNelson wrote: >>> >>> >>> >>> On May 13, 2017 2:02 PM, "Todd Peterson" <[email protected]> wrote: >>> >>> I have a BBB running Angstrom 3.8.13. I have a Realtek USB Wifi, lsusb >>> shows >>> Bus 002 Device 004: ID 0bda:818b Realtek Semiconductor Corp. >>> I put 8192cu.ko in /lib/modules/3.8.13-00720-g4202df2-dirty >>> I did insmod 8192cu.ko >>> lsmod shows >>> Module Size Used by >>> 8192cu 445685 0 >>> >>> dmesg shows [ 6.699120] usbcore: registered new interface driver >>> rtl8192cu >>> >>> The interface does not show up with ifconfig >>> >>> What am I missing? >>> >>> >>> It's that small miniature dongle right? >>> >>> Disable HDMI and suck a little USB extension cable. >>> >>> Your fighting the HDMI gnd plane that interferes with the wifi radio.. >>> >>> >>> Regards, >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/d9aba061-d22f-491b-9729-d3fbc235cc21%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/d9aba061-d22f-491b-9729-d3fbc235cc21%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> >> For more options, visit https://groups.google.com/d/optout. >> > >
-- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/871ffa0c-f85f-4857-bd4b-fe1e8fdbfda5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
