Todd, how are you powering your board ? Hopefully not via USB . . . On Sat, May 13, 2017 at 4:10 PM, acheesehead <[email protected]> wrote:
> Yes, small dongle. It is plugged into a powered USB hub. Disabled HDMI in > uEnv.txt. Rebooted and still no joy. > > I tried the Debian image on the Chipsee DVD earlier today and no luck > there either, but could easily switch back to that. Other choices on the > DVD include Linux-EZSDK and Android. I would welcome any suggestions for > other OS's that support the Chipsee 7" display cape. > > On Saturday, May 13, 2017 at 3:29:19 PM UTC-6, RobertCNelson wrote: >> >> >> >> On May 13, 2017 2:02 PM, "Todd Peterson" <[email protected]> wrote: >> >> I have a BBB running Angstrom 3.8.13. I have a Realtek USB Wifi, lsusb >> shows >> Bus 002 Device 004: ID 0bda:818b Realtek Semiconductor Corp. >> I put 8192cu.ko in /lib/modules/3.8.13-00720-g4202df2-dirty >> I did insmod 8192cu.ko >> lsmod shows >> Module Size Used by >> 8192cu 445685 0 >> >> dmesg shows [ 6.699120] usbcore: registered new interface driver >> rtl8192cu >> >> The interface does not show up with ifconfig >> >> What am I missing? >> >> >> It's that small miniature dongle right? >> >> Disable HDMI and suck a little USB extension cable. >> >> Your fighting the HDMI gnd plane that interferes with the wifi radio.. >> >> >> Regards, >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/beagleboard/d9aba061-d22f-491b-9729-d3fbc235cc21%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/d9aba061-d22f-491b-9729-d3fbc235cc21%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CALHSORrdSu33sHfBTn%3DUPWUCYWyD4hPL23KuzBn7-x5kj0OFvA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
