Yes, small dongle. It is plugged into a powered USB hub. Disabled HDMI in uEnv.txt. Rebooted and still no joy.
I tried the Debian image on the Chipsee DVD earlier today and no luck there either, but could easily switch back to that. Other choices on the DVD include Linux-EZSDK and Android. I would welcome any suggestions for other OS's that support the Chipsee 7" display cape. On Saturday, May 13, 2017 at 3:29:19 PM UTC-6, RobertCNelson wrote: > > > > On May 13, 2017 2:02 PM, "Todd Peterson" <[email protected] <javascript:>> > wrote: > > I have a BBB running Angstrom 3.8.13. I have a Realtek USB Wifi, lsusb > shows > Bus 002 Device 004: ID 0bda:818b Realtek Semiconductor Corp. > I put 8192cu.ko in /lib/modules/3.8.13-00720-g4202df2-dirty > I did insmod 8192cu.ko > lsmod shows > Module Size Used by > 8192cu 445685 0 > > dmesg shows [ 6.699120] usbcore: registered new interface driver > rtl8192cu > > The interface does not show up with ifconfig > > What am I missing? > > > It's that small miniature dongle right? > > Disable HDMI and suck a little USB extension cable. > > Your fighting the HDMI gnd plane that interferes with the wifi radio.. > > > Regards, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d9aba061-d22f-491b-9729-d3fbc235cc21%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
