Hello Again, I read the schematic on the book. The book states via photo to wire things up this way.
Seth On Tuesday, July 11, 2017 at 8:03:05 PM UTC-5, Mala Dies wrote: > > Hello, > > The instructions on the book said to connect the pins of the TMP36 via > jumper wires to the BBB/BBGW in that manner. I am using a BBGW instead of > the BBB or BBBW for this project. > > Seth > > P.S. Should I have the jumper wires connecting to different pins on the > BBGW? > > On Tuesday, July 11, 2017 at 7:40:51 PM UTC-5, RobertCNelson wrote: >> >> On Tue, Jul 11, 2017 at 7:23 PM, Mala Dies <[email protected]> wrote: >> > Hello Again Mr. Dennis, >> > >> > Seth here. I have done some small time work on what wiring I have >> concocted. >> > Here goes: >> > >> > TMP36: >> > >> > Pin 1 is + Vs and it is connected to P9_34 or GNDA_ADC. >> > >> > Pin 2 is Vout and it is connected to P9_40 or AIN1. >> > >> > and... >> > >> > Pin 3 is GND and it is connected to P9_03 or VDD_3V3. >> >> Why are you connecting +Vs to GND, and GND to Vdd? >> >> Regards, >> >> -- >> Robert Nelson >> https://rcn-ee.com/ >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/f8d8e585-7878-4891-8b46-0442ff0076b0%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
