On Friday, September 29, 2017 at 10:35:42 AM UTC-5, Jason Kridner wrote: > > > > I'm looking for a good Fritzing element for the USB type-A, but it is > largely the same except that ID and GND are tied together (connector is > only 4-pin). > > [2nd attempt at posting this; apologies if this is a duplicate]
You're welcome to use the image or Fritzing sketch here [1]. The part itself is in the bin here [2], modeled after an eBay part here [3]. Thanks for the info. This works perfectly for me. [1]: https://github.com/zultron/fritzing-parts/tree/master/pocketbeagle-usb-type-a [2]: https://github.com/zultron/fritzing-parts/blob/master/Collected-Parts.fzb [3]: https://www.ebay.com/itm/382237126536 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2584ee4c-646b-4259-b54c-d33e7ea6289b%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
