Eagle does not support import of Gerbers. It will output Gerbers of boards you have designed. Only the latest (Autodesk) Eagle 8 version will support 3-D parts. --- Graham
== On Friday, February 9, 2018 at 7:59:47 PM UTC-6, john3909 wrote: > > I’m wondering if this can be done with Eagle. It might be possible to > import the gerber file, create the PCB from that and then add the > connectors 3D parts. Perhaps someone who knows Eagle might comment. > > Regards, > John > > > > > > On Feb 9, 2018, at 5:54 PM, Rick Mann <[email protected] > <javascript:>> wrote: > > > > I don't have Altium. > > > >> On Feb 9, 2018, at 17:49 , John Syne <[email protected] <javascript:>> > wrote: > >> > >> If you could Import the board into Altium it is pretty easy to create > the step file. Here is how that works. For each connector, add the 3D step > file from the connector manufacturer, align connectors to board and pads > and then export the complete board in step. I estimate that is would take a > few hours to get this done. > >> > >> I think someone asked for the Alegro ascii file which is necessary to > import the board into Altium, but so far I think Gerald hasn’t got this > done. > >> > >> Regards, > >> John > >> > >> > >> > >> > >>> On Feb 9, 2018, at 4:59 PM, Rick Mann <[email protected] > <javascript:>> wrote: > >>> > >>> Oh, that's a pity. Makes it hard to know exactly where to place > cutouts along the edges. I mean, I can measure it with calipers, but it's > hard to get it accurate. In particular, I wanted to have the reset button > insert into a boss on the enclosure to protect it from accidental presses. > >>> > >>> > >>>> On Feb 9, 2018, at 16:39 , Gerald Coley <[email protected] > <javascript:>> wrote: > >>>> > >>>> No, we never did one. We did not do the profiles for all of the parts > on the board. > >>>> > >>>> Gerald > >>>> > >>>> > >>>> -----Original Message----- > >>>> From: [email protected] <javascript:> [mailto: > [email protected] <javascript:>] On Behalf Of Rick Mann > >>>> Sent: Friday, February 9, 2018 6:34 PM > >>>> To: [email protected] <javascript:> > >>>> Subject: Re: [beagleboard] x15 STEP file? > >>>> > >>>> Any chance of getting one? I'd like to design an enclosure for the > x15. > >>>> > >>>> > >>>>> On Feb 9, 2018, at 16:11 , Gerald Coley <[email protected] > <javascript:>> wrote: > >>>>> > >>>>> No > >>>>> > >>>>> Gerald > >>>>> > >>>>> -----Original Message----- > >>>>> From: [email protected] <javascript:> [mailto: > [email protected] <javascript:>] On Behalf Of Rick Mann > >>>>> Sent: Friday, February 9, 2018 6:07 PM > >>>>> To: Beagle Board <[email protected] <javascript:>> > >>>>> Subject: [beagleboard] x15 STEP file? > >>>>> > >>>>> Is there an x15 STEP CAD file available anywhere? > >>>>> > >>>>> -- > >>>>> Rick Mann > >>>>> [email protected] <javascript:> > >>>>> > >>>>> > >>>>> -- > >>>>> For more options, visit http://beagleboard.org/discuss > >>>>> --- > >>>>> You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > >>>>> To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected] <javascript:>. > >>>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/8309A472-F439-4208-98C2-29BCC20BD3F6%40latencyzero.com. > > > >>>>> For more options, visit https://groups.google.com/d/optout. > >>>>> > >>>>> -- > >>>>> For more options, visit http://beagleboard.org/discuss > >>>>> --- > >>>>> You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > >>>>> To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected] <javascript:>. > >>>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/0debba3a25e74564a53e069445740289%40winhexbeus11.winus.mail. > > > >>>>> For more options, visit https://groups.google.com/d/optout. > >>>> > >>>> > >>>> -- > >>>> Rick Mann > >>>> [email protected] <javascript:> > >>>> > >>>> > >>>> -- > >>>> For more options, visit http://beagleboard.org/discuss > >>>> --- > >>>> You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > >>>> To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected] <javascript:>. > >>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/456546DB-E29B-4693-94AF-207091147C4D%40latencyzero.com. > > > >>>> For more options, visit https://groups.google.com/d/optout. > >>>> > >>>> -- > >>>> For more options, visit http://beagleboard.org/discuss > >>>> --- > >>>> You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > >>>> To unsubscribe from this group and stop receiving emails from it, > send an email to [email protected] <javascript:>. > >>>> To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/18e15d0e850043f3bdc79688a4db3017%40winhexbeus11.winus.mail. > > > >>>> For more options, visit https://groups.google.com/d/optout. > >>> > >>> > >>> -- > >>> Rick Mann > >>> [email protected] <javascript:> > >>> > >>> > >>> -- > >>> For more options, visit http://beagleboard.org/discuss > >>> --- > >>> You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > >>> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > >>> To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/BEFD3E61-AE5E-491D-987A-32CE904320E2%40latencyzero.com. > > > >>> For more options, visit https://groups.google.com/d/optout. > >> > >> -- > >> For more options, visit http://beagleboard.org/discuss > >> --- > >> You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > >> To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > >> To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/E73B7BF4-7B49-4FE9-A7F2-B947F6B3ADC9%40gmail.com. > > > >> For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > Rick Mann > > [email protected] <javascript:> > > > > > > -- > > For more options, visit http://beagleboard.org/discuss > > --- > > You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to [email protected] <javascript:>. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/12ED30BE-B2F5-47F2-8BEF-8570A633C050%40latencyzero.com. > > > > For more options, visit https://groups.google.com/d/optout. > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c9707fb3-0724-4682-aaaf-bffe6bd37c51%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
