On Tue, Feb 20, 2018 at 6:54 PM, ferdster <[email protected]> wrote: > Can't boot back after step 5. I am running from eMMC, if that makes a > difference. > > U-Boot SPL 2018.03-rc2-00002-ged1e504391 (Feb 16 2018 - 15:02:58 -0600) > Trying to boot from MMC2 > MMC: block number 0x1 exceeds max(0x0) > MMC: block number 0x1 exceeds max(0x0) > MMC: block number 0x44 exceeds max(0x0) > MMC: block number 0x301 exceeds max(0x0) > mmc_load_image_raw_sector: mmc block read error > ** Partition 1 not valid on device 1 ** > spl_register_fat_device: fat register err - -1 > spl_load_image_fat: error reading image u-boot.img, err - -1 > spl: no partition table found > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > I'll re-image tomorrow and will reboot after each step, but I assume it was > upgrading the bootloader in step 1.
Cool, haven't tested rc2 with the eMMC yet, i'll debug that tomorrow.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiXgb3h4tzFUm76iNk_CZ%3Dbt8KpQZq6jXJKc6Sbo_BnbA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
