On Wed, Feb 21, 2018 at 9:30 AM, Robert Nelson <[email protected]> wrote: > On Tue, Feb 20, 2018 at 7:28 PM, Robert Nelson <[email protected]> > wrote: >> On Tue, Feb 20, 2018 at 6:54 PM, ferdster <[email protected]> wrote: >>> Can't boot back after step 5. I am running from eMMC, if that makes a >>> difference. >>> >>> U-Boot SPL 2018.03-rc2-00002-ged1e504391 (Feb 16 2018 - 15:02:58 -0600) >>> Trying to boot from MMC2 >>> MMC: block number 0x1 exceeds max(0x0) >>> MMC: block number 0x1 exceeds max(0x0) >>> MMC: block number 0x44 exceeds max(0x0) >>> MMC: block number 0x301 exceeds max(0x0) >>> mmc_load_image_raw_sector: mmc block read error >>> ** Partition 1 not valid on device 1 ** >>> spl_register_fat_device: fat register err - -1 >>> spl_load_image_fat: error reading image u-boot.img, err - -1 >>> spl: no partition table found >>> SPL: failed to boot from all boot devices >>> ### ERROR ### Please RESET the board ### >>> >>> I'll re-image tomorrow and will reboot after each step, but I assume it was >>> upgrading the bootloader in step 1. >> >> Cool, haven't tested rc2 with the eMMC yet, i'll debug that tomorrow.. > > Okay, it "looks" like this was fixed in rc3: > > Blue, eMMC boot.. > > U-Boot SPL 2018.03-rc3-00002-g97c27b4ee5 (Feb 20 2018 - 20:15:25 -0600) > Trying to boot from MMC2 > > U-Boot 2018.03-rc3-00002-g97c27b4ee5 (Feb 20 2018 - 20:15:25 -0600), > Build: jenkins-github_Bootloader-Builder-38 > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > No match for driver 'omap_hsmmc' > No match for driver 'omap_hsmmc' > Some drivers were not found > Reset Source: Global warm SW reset has occurred. > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Board: BeagleBone Black > <ethaddr> not set. Validating first E-fuse MAC > BeagleBone Black: > Model: BeagleBoard.org BeagleBone Blue: > > Next i'm going to upgrade test my BBB farm, so let's see how many > don't come up..
all 19 units came back up.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgS52FvWGs8jtc0qb8yonO5Aqx2dGJ4_G0EBRjSs0UwPA%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
