Hello All, 

I have followed instructions @ 
and was successfully able to run it on my beaglebone back vis SD card.

It would be very helpful if could please clarify below doubts: 
1. uEnv.txt: 
I ended up with two versions of uenv.txt
a. /media/rootfs/ - where uEnv.txt was mentioned under headline "If you 
don't want to clear out the old Bootloader in eMMC add this uEnv.txt to 
I am still not sure what this means

b./media/rootfs/boot/uEnv.txt - which contains uname_r=<my kernel version>

Can someone please explain me which uEnv.txt does u-boot parses

2. What needs to be done to connect beaglebone black to internet via usb 
for this image.

3. Finally where can I find beginers guide on how u-boot overlay works.


For more options, visit http://beagleboard.org/discuss
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
For more options, visit https://groups.google.com/d/optout.

Reply via email to