Hello... m1a is now P9_21. m1b is now P9_22. P9_21 is attached to En A. P9_22 is attached to En B on the L298 board.
If I understand correctly, the old software is just bad. Now, although bad, I can make new software to suit the needs of this board. It has just taken me longer than expected for some reason. I am sure, as you can tell so far, you know by now I am highly novice on this subject and I have been a novice for a good amount of time. Seth P.S. I guess w/ no return value, the system fails. How do you think I should make a return value? On Thursday, May 3, 2018 at 8:02:46 PM UTC-5, Dennis Lee Bieber wrote: > > On Thu, 3 May 2018 14:15:05 -0700 (PDT), Mala Dies > <[email protected] <javascript:>> declaimed the following: > > >P.S. You have given me more ideas so far. Thank you, sir. I see where the > >m1a and m1b was doubled, w/out my looking over it, and caused the pin to > be > >executed twice w/ the latter being the one used. > > > > In the code you had posted, m1a/m1b were not doing anything -- > they > only appear on the left side of an "=". The right side executes, but the > contents there are immediates with no return value (or where strings that > don't do anything). > > > -- > Wulfraed Dennis Lee Bieber AF6VN > [email protected] <javascript:> > HTTP://wlfraed.home.netcom.com/ > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/64a2d203-ccf8-447f-8709-ce1b26663757%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
