Hi Robert, Steve Kronk and I are working on the same project. I was able to help him to get the wiz-click to work on SPI0, but I'm still having an issue getting the SPI1 to work.
When I use PB-SPI0-ETH-WIZ-CLICK.dtbo in the uEnv.txt it works fine, but I've tried using PB-SPI1-ETH-WIZ-CLICK.dtbo on every address in the uEnv.txt with no success. The objective of our project is to utilize two separate Ethernet ports to transfer files with a pocket beagle While using SPI1, the wiznet powers up and the LEDs light up, but the ethernet port is not set up. I'm using the most recent kernel and cape overlay. Any assistance would be greatly appreciated. here is my version.sh debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh git:/opt/scripts/:[8807f233c5269052a0c8b87cd75567d21f773aa5] eeprom:[A335PBGL00A21743GPB42086] model:[TI_AM335x_PocketBeagle] dogtag:[BeagleBoard.org Debian Image 2018-06-17] bootloader:[microSD]:[/dev/mmcblk0]:[U-Boot 2018.03-00002-gac9cce7c6a]:[location: dd MBR] kernel:[4.14.69-ti-r75] nodejs:[v6.14.3] uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_addr3=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.4.20180914.0-0rcnee0~stretch+20180914] pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517] pkg:[kmod]:[23-2rcnee1~stretch+20171005] pkg:[roboticscape]:[0.4.4-git20180608.0-0rcnee0~stretch+20180609]:[GOT_REPLACED_BY_NEXT] WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED] pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi tisdk weston-launch xenomai] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 quiet] dmesg | grep pinctrl-single [ 1.110072] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 dmesg | grep gpio-of-helper [ 1.118532] gpio-of-helper ocp:cape-universal: ready END -Kyle On Monday, September 10, 2018 at 8:45:19 PM UTC-5, RobertCNelson wrote: > > On Mon, Sep 10, 2018 at 8:39 PM Steven Kronk <hesh...@gmail.com > <javascript:>> wrote: > > > > Hi Graham, I'm trying to get my ETH-WIZ_CLICK to work as well, and tried > everything above but can't seem to get it working. > > > > Did you do anything else like configure the PMODE in order to get it to > work? > > Let's see what you've setup so far: > > sudo /opt/scripts/tools/version.sh > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/c43d5581-757c-42f2-bf7b-2a41b31278c5%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
