On Tue, Sep 18, 2018 at 6:45 AM <[email protected]> wrote:
>
> Hi Robert,
>
> Steve Kronk and I are working on the same project. I was able to help him to
> get the wiz-click to work on SPI0, but I'm still having an issue getting the
> SPI1 to work.
>
> When I use PB-SPI0-ETH-WIZ-CLICK.dtbo in the uEnv.txt it works fine, but I've
> tried using PB-SPI1-ETH-WIZ-CLICK.dtbo on every address in the uEnv.txt with
> no success.
>
> The objective of our project is to utilize two separate Ethernet ports to
> transfer files with a pocket beagle
>
> While using SPI1, the wiznet powers up and the LEDs light up, but the
> ethernet port is not set up.
>
> I'm using the most recent kernel and cape overlay. Any assistance would be
> greatly appreciated.
>
> here is my version.sh
>
> debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
> git:/opt/scripts/:[8807f233c5269052a0c8b87cd75567d21f773aa5]
> eeprom:[A335PBGL00A21743GPB42086]
> model:[TI_AM335x_PocketBeagle]
> dogtag:[BeagleBoard.org Debian Image 2018-06-17]
> bootloader:[microSD]:[/dev/mmcblk0]:[U-Boot
> 2018.03-00002-gac9cce7c6a]:[location: dd MBR]
> kernel:[4.14.69-ti-r75]
> nodejs:[v6.14.3]
> uboot_overlay_options:[enable_uboot_overlays=1]
> uboot_overlay_options:[uboot_overlay_addr3=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo]
> uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo]
> uboot_overlay_options:[enable_uboot_cape_universal=1]
> pkg check: to individually upgrade run: [sudo apt install --only-upgrade
> <pkg>]
> pkg:[bb-cape-overlays]:[4.4.20180914.0-0rcnee0~stretch+20180914]
> pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517]
> pkg:[kmod]:[23-2rcnee1~stretch+20171005]
> pkg:[roboticscape]:[0.4.4-git20180608.0-0rcnee0~stretch+20180609]:[GOT_REPLACED_BY_NEXT]
> WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED]
> pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328]
> groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev
> users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep admin spi
> tisdk weston-launch xenomai]
> cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
> root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M
> net.ifnames=0 quiet]
> dmesg | grep pinctrl-single
> [ 1.110072] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
> 568
> dmesg | grep gpio-of-helper
> [ 1.118532] gpio-of-helper ocp:cape-universal: ready
> END
Everything looks fine ^...
Are you by chance trying to use "two" Wiznet devices on one PocketBeagle?
Otherwise, i just have one unit and just retested with this setup:
debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
git:/opt/scripts/:[8807f233c5269052a0c8b87cd75567d21f773aa5]
eeprom:[A335PBGL00A21740GPB42206]
model:[TI_AM335x_PocketBeagle]
dogtag:[BeagleBoard.org Debian Image 2018-09-16]
bootloader:[microSD]:[/dev/mmcblk0]:[U-Boot
2018.09-00002-g0b54a51eee]:[location: dd MBR]
kernel:[4.14.69-ti-r75]
nodejs:[v6.14.4]
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo
]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>]
pkg:[bb-cape-overlays]:[4.4.20180914.0-0rcnee0~stretch+20180914]
pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517]
pkg:[kmod]:[23-2rcnee1~stretch+20171005]
pkg:[librobotcontrol]:[1.0.2-git20180829.0-0rcnee0~stretch+20180830]
pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video
plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm
eqep admin spi tisdk weston-launch xenomai]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M
net.ifnames=0 quiet]
dmesg | grep pinctrl-single
[ 1.084222] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
dmesg | grep gpio-of-helper
[ 1.092500] gpio-of-helper ocp:cape-universal: ready
END
Both:
uboot_overlay_addr0=/lib/firmware/PB-SPI0-ETH-WIZ-CLICK.dtbo
and
uboot_overlay_addr0=/lib/firmware/PB-SPI1-ETH-WIZ-CLICK.dtbo
bring up the interface just fine:
eth0: flags=-28605<UP,BROADCAST,RUNNING,MULTICAST,DYNAMIC> mtu 1500
inet 192.168.0.125 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::9c00:c6ff:feff:5555 prefixlen 64 scopeid 0x20<link>
ether 9e:00:c6:ff:55:55 txqueuelen 1000 (Ethernet)
RX packets 80 bytes 13133 (12.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 61 bytes 10342 (10.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
debian@beaglebone:~$ ping google.com
PING google.com (216.58.192.142) 56(84) bytes of data.
64 bytes from ord36s01-in-f142.1e100.net (216.58.192.142): icmp_seq=1
ttl=50 time=46.3 ms
64 bytes from ord36s01-in-f142.1e100.net (216.58.192.142): icmp_seq=2
ttl=50 time=47.5 ms
Regards,
--
Robert Nelson
https://rcn-ee.com/
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAOCHtYiMNkr89ZwqY0BYhHtOUBWZXpkX9sUc2oBzxV0X%2BpeATw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
