It looks like with the uSD card installed and pressing the BOOT Button when powering on the board is forcing running the flasher from he SD card:
*Begin: Running /scripts/local-bottom ... done.* *Begin: Running /scripts/init-bottom ... done.* *[H [J-----------------------------* *Starting eMMC Flasher from microSD media* *Version: [1.20160606: run bb-wl18xx-wlan0 in single user mode...]* *-----------------------------* *Checking for Valid bbgw-eeprom header* *Valid bbgw-eeprom header found [335]* *-----------------------------* *copying: [/dev/mmcblk1] -> [/dev/mmcblk0]* When this is complete and the cylon LED pattern ends, the board should power down. *[ 535.950335] systemd-shutdown[1]: Powering off.* *[ 535.980972] musb-hdrc musb-hdrc.1.auto: remove, state 4* *[ 535.986308] usb usb1: USB disconnect, device number 1* *[ 535.991404] usb 1-1: USB disconnect, device number 2* *[ 535.998053] musb-hdrc musb-hdrc.1.auto: USB bus 1 deregistered* *[ 536.004724] reboot: Power down* *[ 536.007965] System will go to power_off state in approx. 1 second* After this, it should be a matter of just powering off the board and booting it again. If you are still seeing the panic while booting the board, I would redownload the image for the board and burn it to uSD card using something like Etcher and try again. If you can remove the "cmdline" comment at the bottom of the uEnv.txt file and then boot the board, it would be interesting to see if that makes a diff. You would have to comment it out again once the flash is complete though. Jon On Fri, Nov 1, 2019 at 7:16 AM Michael B <[email protected]> wrote: > For completeness, here is the boot hitting space to get into u-boot > console. > > U-Boot 2016.03-00001-g148e520 (Jun 06 2016 - 11:27:44 -0500), Build: > jenkins-github_Bootloader-Builder-395 > > Watchdog enabled > I2C: ready > DRAM: 512 MiB > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Net: <ethaddr> not set. Validating first E-fuse MAC > Could not get PHY for cpsw: addr 0 > cpsw, usb_ether > Press SPACE to abort autoboot in 2 seconds > => > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/b35ef0b8-b0a6-4f50-a962-f0054f561df9%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/b35ef0b8-b0a6-4f50-a962-f0054f561df9%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkquJeVOGgXCz1EcD6%2Bn5G7-x9KMV%3Dg%2B5zPBPFOWXpTVow%40mail.gmail.com.
