Cowabunga! I have shell on the board. Thanks all for the advice. It really took a community on this one.
Problem: - I had put a flasher image onto the card at some point (Newb). - Every time I put a SD in it wrote the flasher image to the SD Fix: - blow away the partition on the eMCC - I don't feel qualified to put the command for this here as you could do a lot of badness if you get this wrong. - went to a Windows computer and flashed the latest - several attempts with my Mac looked like they worked but the image wasn't working. The fact that you couldn't see the card from the Mac after putting the image on the SD was a sign. - took the # off the flasher line in the uEnv.txt file. - put the card in. held the user button and powered it up. - proper sd to eMCC flashing occurred. - shell achieved. Thanks again for all the help. Michael B -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8dac35da-6a9a-465a-b50c-3a9545598ebe%40googlegroups.com.
