As of now, it looks like when I power on with the Boot button pressed,
literally nothing happens.
Here is what it looks like with no SD card and I boot the board.
- no boot button pressed
- no sd card inserted
U-Boot SPL 2016.03-00001-g148e520 (Jun 06 2016 - 11:27:44)
Trying to boot from MMC
bad magic
U-Boot 2016.03-00001-g148e520 (Jun 06 2016 - 11:27:44 -0500), Build:
jenkins-github_Bootloader-Builder-395
Watchdog enabled
I2C: ready
DRAM: 512 MiB
Reset Source: Power-on reset has occurred.
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
Could not get PHY for cpsw: addr 0
cpsw, usb_ether
Press SPACE to abort autoboot in 2 seconds
Card did not respond to voltage select!
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
Card did not respond to voltage select!
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1(part 0) is current device
Scanning mmc 1:1...
gpio: pin 56 (gpio 56) value is 0
gpio: pin 55 (gpio 55) value is 0
gpio: pin 54 (gpio 54) value is 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc1(part 0) is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
Checking for: /boot.scr ...
Checking for: /boot/boot.scr ...
Checking for: /boot/uEnv.txt ...
gpio: pin 55 (gpio 55) value is 1
1263 bytes read in 16 ms (76.2 KiB/s)
Loaded environment from /boot/uEnv.txt
Checking if uname_r is set in /boot/uEnv.txt...
gpio: pin 56 (gpio 56) value is 1
Running uname_boot ...
loading /boot/vmlinuz-4.4.9-ti-r25 ...
7833256 bytes read in 446 ms (16.7 MiB/s)
loading /boot/dtbs/4.4.9-ti-r25/am335x-bonegreen-wireless.dtb ...
61860 bytes read in 47 ms (1.3 MiB/s)
loading /boot/initrd.img-4.4.9-ti-r25 ...
4828115 bytes read in 281 ms (16.4 MiB/s)
debug: [console=ttyO0,115200n8
root=UUID=2b96442f-bc55-493c-8e3d-4c599d12fbad ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-bbgw.sh] ...
debug: [bootz 0x82000000 0x88080000:49abd3 0x88000000] ...
Kernel image @ 0x82000000 [ 0x000000 - 0x7786a8 ]
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Loading Ramdisk to 8fb65000, end 8ffffbd3 ... OK
Loading Device Tree to 8fb52000, end 8fb641a3 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.9-ti-r25 (root@b3-jetson-tk1-2gb) (gcc
version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Thu May 5 23:08:13 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing
instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Green Wireless
[ 0.000000] cma: Reserved 24 MiB at 0x9e000000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df923000 s24320 r8192 d20736
u53248
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8
root=UUID=2b96442f-bc55-493c-8e3d-4c599d12fbad ro rootfstype=ext4 rootwait
init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3-bbgw.sh
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.000000] Memory: 474012K/522240K available (7344K kernel code, 914K
rwdata, 3704K rodata, 604K init, 907K bss, 23652K reserved, 24576K
cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0ad2480 (11050 kB)
[ 0.000000] .init : 0xc0ad3000 - 0xc0b6a000 ( 604 kB)
[ 0.000000] .data : 0xc0b6a000 - 0xc0c4e818 ( 915 kB)
[ 0.000000] .bss : 0xc0c51000 - 0xc0d33de8 ( 908 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128
interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000012] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every
89478484971ns
[ 0.000031] clocksource: timer1: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000043] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000224] Console: colour dummy device 80x30
[ 0.000249] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.000256] This ensures that you still see kernel messages. Please
[ 0.000262] update your kernel commandline.
[ 0.000280] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ 0.046933] pid_max: default: 32768 minimum: 301
[ 0.047066] Security Framework initialized
[ 0.047079] Yama: becoming mindful.
[ 0.047110] AppArmor: AppArmor disabled by boot time parameter
[ 0.047266] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.047278] Mountpoint-cache hash table entries: 1024 (order: 0, 4096
bytes)
[ 0.048051] Initializing cgroup subsys io
[ 0.048080] Initializing cgroup subsys memory
[ 0.048118] Initializing cgroup subsys devices
[ 0.048135] Initializing cgroup subsys freezer
[ 0.048151] Initializing cgroup subsys net_cls
[ 0.048164] Initializing cgroup subsys perf_event
[ 0.048179] Initializing cgroup subsys net_prio
[ 0.048194] Initializing cgroup subsys pids
[ 0.048251] CPU: Testing write buffer coherency: ok
[ 0.048303] ftrace: allocating 34073 entries in 67 pages
[ 0.133384] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.133505] Setting up static identity map for 0x80008240 - 0x8000828c
[ 0.136885] Brought up 1 CPUs
[ 0.136906] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ 0.136914] CPU: All CPU(s) started in SVC mode.
[ 0.138332] devtmpfs: initialized
[ 0.157106] VFP support v0.3: implementor 41 architecture 3 part 30
variant c rev 3
[ 0.175175] omap_hwmod: debugss: _wait_target_disable failed
[ 0.229116] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.231307] xor: measuring software checksum speed
[ 0.270932] arm4regs : 1221.000 MB/sec
[ 0.310933] 8regs : 1094.000 MB/sec
[ 0.350930] 32regs : 1093.000 MB/sec
[ 0.390931] neon : 1754.000 MB/sec
[ 0.390938] xor: using function: neon (1754.000 MB/sec)
[ 0.391028] pinctrl core: initialized pinctrl subsystem
[ 0.392981] NET: Registered protocol family 16
[ 0.395656] DMA: preallocated 256 KiB pool for atomic coherent
allocations
[ 0.396861] cpuidle: using governor ladder
[ 0.396881] cpuidle: using governor menu
[ 0.401826] OMAP GPIO hardware version 0.1
[ 0.413401] No ATAGs?
[ 0.413431] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.413969] omap4_sram_init:Unable to allocate sram needed to handle
errata I688
[ 0.413982] omap4_sram_init:Unable to get sram pool needed to handle
errata I688
[ 0.491105] raid6: int32x1 gen() 269 MB/s
[ 0.559025] raid6: int32x1 xor() 236 MB/s
[ 0.627044] raid6: int32x2 gen() 356 MB/s
[ 0.694976] raid6: int32x2 xor() 269 MB/s
[ 0.763015] raid6: int32x4 gen() 405 MB/s
[ 0.831032] raid6: int32x4 xor() 259 MB/s
[ 0.899082] raid6: int32x8 gen() 359 MB/s
[ 0.966933] raid6: int32x8 xor() 231 MB/s
[ 1.034956] raid6: neonx1 gen() 1461 MB/s
[ 1.102952] raid6: neonx1 xor() 846 MB/s
[ 1.170960] raid6: neonx2 gen() 1883 MB/s
[ 1.238942] raid6: neonx2 xor() 1171 MB/s
[ 1.306943] raid6: neonx4 gen() 1975 MB/s
[ 1.374947] raid6: neonx4 xor() 1204 MB/s
[ 1.442955] raid6: neonx8 gen() 1211 MB/s
[ 1.510937] raid6: neonx8 xor() 671 MB/s
[ 1.510944] raid6: using algorithm neonx4 gen() 1975 MB/s
[ 1.510951] raid6: .... xor() 1204 MB/s, rmw enabled
[ 1.510957] raid6: using intx1 recovery algorithm
[ 1.520011] edma 49000000.edma: TI EDMA DMA engine driver
[ 1.525079] SCSI subsystem initialized
[ 1.525796] usbcore: registered new interface driver usbfs
[ 1.525863] usbcore: registered new interface driver hub
[ 1.525957] usbcore: registered new device driver usb
[ 1.526534] omap_i2c 44e0b000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring
probe
[ 1.526579] omap_i2c 4819c000.i2c: could not find pctldev for node
/ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring
probe
[ 1.526693] media: Linux media interface: v0.10
[ 1.526753] Linux video capture interface: v2.00
[ 1.526844] pps_core: LinuxPPS API ver. 1 registered
[ 1.526852] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <[email protected]>
[ 1.526878] PTP clock support registered
[ 1.527797] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 1.529086] NetLabel: Initializing
[ 1.529098] NetLabel: domain hash size = 128
[ 1.529104] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.529160] NetLabel: unlabeled traffic allowed by default
[ 1.529492] clocksource: Switched to clocksource timer1
[ 1.635426] NET: Registered protocol family 2
[ 1.636168] TCP established hash table entries: 4096 (order: 2, 16384
bytes)
[ 1.636217] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 1.636276] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.636342] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 1.636363] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 1.636648] NET: Registered protocol family 1
[ 1.637194] RPC: Registered named UNIX socket transport module.
[ 1.637207] RPC: Registered udp transport module.
[ 1.637213] RPC: Registered tcp transport module.
[ 1.637219] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.637884] Unpacking initramfs...
[ 1.976014] Freeing initrd memory: 4716K (cfb65000 - d0000000)
[ 1.976527] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5
counters available
[ 1.979269] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 1.979383] audit: initializing netlink subsys (disabled)
[ 1.979455] audit: type=2000 audit(1.916:1): initialized
[ 1.989438] zbud: loaded
[ 1.990207] VFS: Disk quotas dquot_6.6.0
[ 1.990467] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.993084] NFS: Registering the id_resolver key type
[ 1.993144] Key type id_resolver registered
[ 1.993152] Key type id_legacy registered
[ 1.993177] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.993582] fuse init (API version 7.23)
[ 1.994215] SGI XFS with ACLs, security attributes, realtime, no debug
enabled
[ 2.001882] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 249)
[ 2.002105] io scheduler noop registered
[ 2.002120] io scheduler deadline registered
[ 2.002179] io scheduler cfq registered (default)
[ 2.003499] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size
568
[ 2.004938] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 2.006356] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 2.009203] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158,
base_baud = 3000000) is a 8250
[ 2.892737] console [ttyS0] enabled
[ 2.897153] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 159,
base_baud = 3000000) is a 8250
[ 2.907474] [drm] Initialized drm 1.1.0 20060810
[ 2.916638] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.923309] ehci-platform: EHCI generic platform driver
[ 2.928762] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.934432] usbcore: registered new interface driver usb-storage
[ 2.942150] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 2.952260] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 2.961208] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 2.967061] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned
bus number 1
[ 2.975187] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.982037] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.989304] usb usb1: Product: MUSB HDRC host driver
[ 2.994305] usb usb1: Manufacturer: Linux 4.4.9-ti-r25 musb-hcd
[ 3.000263] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.006077] hub 1-0:1.0: USB hub found
[ 3.009980] hub 1-0:1.0: 1 port detected
[ 3.023107] mousedev: PS/2 mouse device common for all mice
[ 3.031240] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as
rtc0
[ 3.039200] i2c /dev entries driver
[ 3.044307] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60
sec
[ 3.052014] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.151034] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.157204] usbcore: registered new interface driver usbhid
[ 3.162891] usbhid: USB HID core driver
[ 3.166919] mmc1: MAN_BKOPS_EN bit is not set
[ 3.171627] ashmem: initialized
[ 3.175742] remoteproc0: wkup_m3 is available
[ 3.180274] remoteproc0: Note: remoteproc is still under development
and considered experimental.
[ 3.189327] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and
backward compatibility isn't yet guaranteed.
[ 3.201874] mmc1: new high speed MMC card at address 0001
[ 3.209229] NET: Registered protocol family 10
[ 3.214623] mmcblk0: mmc1:0001 Q2J54A 3.64 GiB
[ 3.220572] mip6: Mobile IPv6
[ 3.223991] NET: Registered protocol family 17
[ 3.228536] mmcblk0boot0: mmc1:0001 Q2J54A partition 1 2.00 MiB
[ 3.234764] Key type dns_resolver registered
[ 3.239394] mmcblk0boot1: mmc1:0001 Q2J54A partition 2 2.00 MiB
[ 3.245391] mpls_gso: MPLS GSO support
[ 3.250288] omap_voltage_late_init: Voltage driver support not added
[ 3.256859] mmcblk0: p1
[ 3.261230] PM: Cannot get wkup_m3_ipc handle
[ 3.267067] ThumbEE CPU extension supported.
[ 3.271513] Registering SWP/SWPB emulation handler
[ 3.277556] registered taskstats version 1
[ 3.281901] zswap: loaded using pool lzo/zbud
[ 3.292755] omap_hsmmc 47810000.mmc: card claims to support voltages
below defined range
[ 3.300986] Btrfs loaded
[ 3.328207] Key type encrypted registered
[ 3.335372] input: tps65217_pwr_but as
/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 3.367264] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.373302] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.380310] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.387842] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.395332] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.402735] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.410147] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1
bytes/write
[ 3.417123] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.423875] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 3.430880] remoteproc0: powering up wkup_m3
[ 3.435388] remoteproc0: Booting fw image am335x-pm-firmware.elf, size
219735
[ 3.442982] remoteproc0: remote processor wkup_m3 is now up
[ 3.448678] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version =
0x191
[ 3.460168] bone_capemgr bone_capemgr: Baseboard:
'A335BNLT,GW1A,BBGW16063625'
[ 3.467531] bone_capemgr bone_capemgr:
compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.513497] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.534366] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 3.557496] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.564725] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 3.571497] usb 1-1: New USB device strings: Mfr=0, Product=1,
SerialNumber=0
[ 3.578680] usb 1-1: Product: USB2.0 Hub
[ 3.583807] hub 1-1:1.0: USB hub found
[ 3.587941] hub 1-1:1.0: 4 ports detected
[ 3.597511] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.635436] mmc2: new high speed SDIO card at address 0001
[ 3.642284] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.648320] bone_capemgr bone_capemgr: initialized OK.
[ 3.655131] PM: bootloader does not support rtc-only!
[ 3.660832] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01
00:00:01 UTC (946684801)
[ 3.669860] of_cfs_init
[ 3.672431] of_cfs_init: OK
[ 3.681702] Freeing unused kernel memory: 604K (c0ad3000 - c0b6a000)
Loading, please wait...
[ 3.884915] systemd-udevd[104]: starting version 215
[ 3.895832] random: systemd-udevd urandom read with 44 bits of entropy
available
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ...
done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.25.2
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
BOOT: clean, 114871/238560 files, 574945/954112 blocks
done.
[ 4.948553] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data
mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
[H [J-----------------------------
Starting eMMC Flasher from microSD media
Version: [1.20160606: run bb-wl18xx-wlan0 in single user mode...]
-----------------------------
Checking for Valid bbgw-eeprom header
Valid bbgw-eeprom header found [335]
-----------------------------
copying: [/dev/mmcblk0] -> [/dev/mmcblk1]
lsblk:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0boot0 179:8 0 2M 1 disk
mmcblk0boot1 179:16 0 2M 1 disk
mmcblk0 179:0 0 3.7G 0 disk
`-mmcblk0p1 179:1 0 3.7G 0 part /
-----------------------------
df -h | grep rootfs:
-----------------------------
Error: [/dev/mmcblk1] does not exist
writing to [/dev/mmcblk1] failed...
[ 10.621725] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000200
[ 10.621725]
[ 10.630917] CPU: 0 PID: 1 Comm: init-eMMC-flash Not tainted 4.4.9-ti-r25
#1
[ 10.637905] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 10.644062] [<c0015b61>] (unwind_backtrace) from [<c00123f5>]
(show_stack+0x11/0x14)
[ 10.651854] [<c00123f5>] (show_stack) from [<c03c9023>]
(dump_stack+0x73/0x80)
[ 10.659116] [<c03c9023>] (dump_stack) from [<c00f240d>]
(panic+0xbd/0x1e8)
[ 10.666029] [<c00f240d>] (panic) from [<c00342dd>] (do_exit+0x7d5/0x7f4)
[ 10.672762] [<c00342dd>] (do_exit) from [<c0034355>]
(do_group_exit+0x2d/0x8c)
[ 10.680017] [<c0034355>] (do_group_exit) from [<c00343c7>]
(SyS_exit_group+0x13/0x14)
[ 10.687889] [<c00343c7>] (SyS_exit_group) from [<c000ec41>]
(ret_fast_syscall+0x1/0x52)
[ 10.695937] ---[ end Kernel panic - not syncing: Attempted to kill init!
exitcode=0x00000200
[ 10.695937]
[ 20.381507] random: nonblocking pool is initialized
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3c3c9be6-fe33-4506-9d2b-ebe09a86b6bb%40googlegroups.com.
