On Tue, Mar 24, 2020 at 10:01 PM Michael Ascenzi <[email protected]>
wrote:

> so looking at the BBB documentation
>
> [image: hdmi.jpg]
> so these are just the supported resolutions for the BBB correct?
>

You added the word "just".. That's untrue... In the documentation that is a
list of "standard" supported monitor resolutions.


>
> In my case, the EVM would have its default resolution associated with it,
> which is what the BBB would be set to. Correct?
>

The DLP2000, is 640x360 as specified in the display-timings configuration:

https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/DLPDLCR2000-00A0.dts#L228-L242



> Would changing the resolution via Xrandr have any affect on the image
> transfer rate from the BBB to the EVM? I don't have access to the BBB & EVM
> at the moment. At the office. or else I would try it. I'll try to head
> into the office tomorrow.
>

No, it has a fixed resolution.


>
> Speaking with the guys over at TI, the EVM is set to a default rate of
> 60hz based on the data being piped over the parallel video input. They say
> that the EVM will update at 60hz, but the week link is the speed at which
> the BBB can load and push the image files over the parrallel video input.
>
> right now we have an oscilloscope connected to the vsync pin of the gpio
> on the BBB. Which is part of the parrellel video input.  We assumed that
> the BBB was working at 24hz cause of what we were seeing on the scope. This
> is our suspicion because when we measured VSYNC directly on the beagle
> using the P8 expansion header (pin 27 lcd_vsync) and an oscilloscope we
> measured 23.6 Hz (basically round up and its 24 Hz).
>
> Any thoughts?
>

Regards,

-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYiSXimzfn0U0WPgGah8YUtVL5P%2BKEnmpOQrj3srzGMGow%40mail.gmail.com.

Reply via email to