Whether I have the "switch" on or off in Sys Prefs/Keyboard, F10, F11 and F12 will not respond. They have the function printed on them as well. Whether or not they are assigned Triggers in QS as well or in any combination thereof.
I'm connected to my I/O via Tbolt. I'd say, since my Sys Prefs/Sound uses the Apollo I/O for system as well as ProTools, that's the rub. The iTunes transport triggers work only with the QS Triggers. Then there's this issue I encountered in playing with the Fkeys. Best explained with the attached screen shot. Suffice to say, I can't change Mute, Decrease or Increase for some reason. On Saturday, April 11, 2015 at 7:45:00 PM UTC-4, Rob McBroom wrote: > > On 10 Apr 2015, at 17:02, metropical wrote: > > I have F11 and F12 set the same but they do nothing. This could be because > I am using an external audio I/O for music work and I guess that effective > defeats the default or use of F11 and F12. > I was thinking that F11, F12 could control the iTunes volume slider. > > It depends on if you’re talking about *actual* F11/F12 or just the keys > that have F11 and F12 printed on them. By default, those keys are volume > controls and they only become function keys if you hold down fn. > > So no, just hitting them will not control iTunes volume, but hitting them > *and* fn should do it (if you assign F11/F12 to the triggers). This > behavior can be reversed in System Preferences, so the keys will act like > function keys by default and switch to system volume controls only if you > hold fn. That would allow you to control iTunes volume just by tapping > those keys, but then you have to hold fn all the time to play/pause, > adjust brightness, etc. > > If you connect something with an optical (S/PDIF) cable, the system volume > controls are disabled. I wonder if that’s what you’re running into. > > -- > Rob McBroom > http://www.skurfer.com/ > -- You received this message because you are subscribed to the Google Groups "Quicksilver" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/blacktree-quicksilver. For more options, visit https://groups.google.com/d/optout.
