F10, 11 and 12, near as I can tell, are not being utilized anywhere, Mission Control or other, within the OS. However, ProTools does use them within the app. I guess they could have poorly coded and interrupted the OS use as well. I wouldn't put it past avid/digi.
The Triggers were disabled for the shot, but I had tried them checked and enabled. The odd thing is I can't remove/edit Cmd-W from the Mute trigger. I tried unplugging the I/O to see if that would help disable or edit the F key. NC. No big. I'm sure I'll survive. The Play/Pause will do nicely for Mute. On Sunday, April 12, 2015 at 10:58:31 PM UTC-4, Rob McBroom wrote: > > On 12 Apr 2015, at 20:49, metropical wrote: > > > Whether I have the "switch" on or off in Sys Prefs/Keyboard, F10, F11 > > and > > F12 will not respond. They have the function printed on them as well. > > Whether or not they are assigned Triggers in QS as well or in any > > combination thereof. > > I tried plain F11 and F12 and I think the only reason they didn’t work > in my case is that Mission Control is already using them. You might > check that. > > > Then there's this issue I encountered in playing with the Fkeys. Best > > explained with the attached screen shot. > > Suffice to say, I can't change Mute, Decrease or Increase for some > > reason. > > Most of the triggers in that screen shot are disabled (via the check box > to the left). Make sure they’re on before trying to use them. Are you > saying you can’t modify triggers, or that they don’t work after you > do? > > -- > Rob McBroom > http://www.skurfer.com/ > -- You received this message because you are subscribed to the Google Groups "Quicksilver" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/blacktree-quicksilver. For more options, visit https://groups.google.com/d/optout.
