On 09/12/2015 04:27 PM, Wayne Sallee wrote:
Time to rebuild the kernel!
root [ ~ ]# lsmod
Module Size Used by
bluetooth 303868 0
rt73usb 23351 0
rt2x00usb 8842 1 rt73usb
crc_itu_t 1307 1 rt73usb
rt2x00lib 36118 2 rt73usb,rt2x00usb
i2c_piix4 8697 0
root [ ~ ]# ifup wlan0
* Bringing up the wlan0
interface...
[ OK ]
Starting wpa_supplicant on the wlan0 interface...Could not set interface wlan0
flags (UP): No such file or directory
nl80211: Could not set interface 'wlan0' UP
Could not set interface wlan0 flags (UP): No such file or directory
WEXT: Could not set interface 'wlan0' UP
wlan0: Failed to initialize driver interface
*****
[ FAIL ]
RTNETLINK answers: No such file or directory
root [ ~ ]# ip link list
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP
mode DEFAULT group default qlen 1000
link/ether 08:00:27:df:5e:da brd ff:ff:ff:ff:ff:ff
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default
link/sit 0.0.0.0 brd 0.0.0.0
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default qlen 1000
link/ether 00:1a:70:af:24:39 brd ff:ff:ff:ff:ff:ff
root [ ~ ]#
Much better now, but the ifup command still gives errors.
Wayne Sallee
[email protected]
--
http://lists.linuxfromscratch.org/listinfo/blfs-support
FAQ: http://www.linuxfromscratch.org/blfs/faq.html
Unsubscribe: See the above information page
