If you decide to look for a new scanner, there are a few duplex capable models you might want to consider. This means that when using the sheet feeder, the scanner will read both sides of the page at one time. These scanners are in the $1000 to $1500 range. These are not to be confused with the high speed scanners that cost $4000 to $7000. I believe that Cannon, Kodak and Fujisu all have models in this lower price range.
Annette -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rick Sent: Monday, November 26, 2007 8:37 PM To: [email protected] Subject: Re: [Blind-Computing] Open Book 8 & Scanners? Hi Patricia, I would check the HP website for updated drivers for the scanner, and see if there are any firmware revisions as well. As far as Openbook 8, I would check the FS website scanner page for compatibility. Hold on to that scanner for long as you can, legal size scanners are not cheap these days. You might also consider anMFD, multi-function device, or scanner with a document feeder. I am currently useing an MFD with a document feeder, and it will handle longer sheets of paper, although, I am not sure of the exact width. HTH, Richard Justice-website ownner www.blind-computing.com ----- Original Message ----- From: "Patricia Dunbar" <[EMAIL PROTECTED]> To: "BC" <[email protected]> Sent: Monday, November 26, 2007 8:26 PM Subject: [Blind-Computing] Open Book 8 & Scanners? > Hi list, > > Was reading over the new info on Open Book 8 and since I use the last > version 7.20 with an HP/6300P legal size scanner, I was wondering if > anyone on the list uses this particular scanner or could suggest a > better one? > It still works, but lately it is making some funny sounds. I also from > time to time have to reinitialize the scanner for some reason this > happens and when I go to use OB a message pops stating no scanner is > detected... > Also, I have to make sure the Prefetch folder is emptied out from time > to time as another message pops up stating, not enough disk space available. > > Can anyone offer any help on these matters? I am using xp pro, jaws 8. > > Thanks, > > Patricia > > > Visit the Blind Computing List home page at: > http://www.blind-computing.com > Address for the list archives: > http://www.mail-archive.com/[email protected]/ > To post to this group, send email to > [email protected] > To unsubscribe from this group, send an email to > [EMAIL PROTECTED] > For help from Mailman with your account Put the word help in the > subject or body of a blank message to: > [EMAIL PROTECTED] > Use the following form in order to contact the management team > http://www.jaws-users.com/BlindComputing.php > If you wish to join the JAWS Users List send a blank email to the > following address: > [EMAIL PROTECTED] Visit the Blind Computing List home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.jaws-users.com/BlindComputing.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED] Visit the Blind Computing List home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/[email protected]/ To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [EMAIL PROTECTED] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [EMAIL PROTECTED] Use the following form in order to contact the management team http://www.jaws-users.com/BlindComputing.php If you wish to join the JAWS Users List send a blank email to the following address: [EMAIL PROTECTED]
