At the default of 300 DPI, I also usually get that level of accuracy and the scan is faster than at 600 DPI.
Riana -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of mark Sent: Wednesday, July 20, 2011 4:06 PM To: [email protected] Subject: Re: [Blind-Computing] suggestion for Optimizing Scan Quality: Hi I use the scanning software that came with my HP 5000 scanner. I adjusted it to scan at 600 DPI and the results are close to 100% on a standard textbook. God bless, Mark God Loves you! You can visit my website at: http://christiantraditions.info Please visit my Prayer page at: http://christiantraditions.info/mailman/listinfo/prayerlist_christiantra diti ons.info -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Van Der Walt Riana Sent: Wednesday, July 20, 2011 6:40 AM To: [email protected] Subject: Re: [Blind-Computing] suggestion for Optimizing Scan Quality: I forgot to mention that it also improves accuracy if one puts a book on the scanner lid, while scanning, which lid should always be closed. Especially with thick books, that helps to keep the page as flat as possible on the scanner, especially at the binding in the middle. Openbook doesn't have that feature, but with Kurzweil, I do an "Optimise scanning," via the scan menu and save the settings, if what I start scanning has a less accurate percentage rate than 98%. The Kurzweil announcement of confidence accuracy level is per default set to 95%, meaning that when the accuracy is better it's not announced, but I changed the default announcement to 98%. It also streamlines the recognition process better if one changes the progress of scanning and recognition announcements from words to sounds, especially if one is reading and/or editing while scanning, as it then doesn't stop the reading of text to announce but play the relevant sound together with the speech of the text one is busy reading. Riana -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Van Der Walt Riana Sent: Wednesday, July 20, 2011 3:25 PM To: [email protected] Subject: Re: [Blind-Computing] suggestion for Optimizing Scan Quality: I really don't know, as I bought the previous model in the beginning of the year and I'm in South-Africa, so probably paid much more than you would. According to the Kurzweil list you should get the relevant info, or links to dealers now on the Plustec Opticbook site, for which I don't have an url at hand. Regards, Riana -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Janie Degenshein Sent: Wednesday, July 20, 2011 3:21 PM To: [email protected] Subject: Re: [Blind-Computing] suggestion for Optimizing Scan Quality: Thanks for this valuable info About how much is this scanner? Keep Smiling, Janie Degenshein "Happiness isn't having what you want, but wanting what you already have" Access Tech Consultant Facilitator of ECHO (Eyes Closed Hearts Open) Co-host of OTBS On The Bright Side www.thruoureyes.org/brightside.html [email protected] -----Original Message----- From: Van Der Walt Riana Sent: Wednesday, July 20, 2011 8:57 AM To: [email protected] Subject: Re: [Blind-Computing] suggestion for Optimizing Scan Quality: Hello, I don't know your scanner model, but you didn't mention which version of Kurzweil 1000 you are using. The latest is version 12.04 and since version 10, I get an average accuracy confidence rate regarding the scans of more than 98% on printed text. I find books to scan more accurate if put sideways on a flatbed scanner and scanning two pages per scan and the response is quicker if you change the automatic page orientation from automatic to however you put your book, mine is the rightside of the page at the front of the scanner, but it will depend on your scanner. Your cpu processor and amount of ram will also make a difference and the Plustech opticbook 4600 scans a double page in three seconds with my present quad core processor pc with 4 gig of ram. The replacement model for that scanner has just become available and is the Plustec Opticbook 4800, with the same, if not better results than the one I use and a different scanning lamp, which apparently doesn't require the 30 secconds warm up time, according to messages on the Kurzweil list. If by OBR you mean Open book, then I found with openbook 7.02, which I still use at work, that accuracy is better when you have the page recognised after every scan and not scan continuously in a batch, but recognition is sometimes fast enough that you just have time to turn the page in any case, before the recognition is complete and you could proceed with the next scan, scanner setting must be on scan in background and tones enabled and then you can read and edit in a different place in the same book, while scanning. this is with a slow pc with less than 1 gig ram. Kurzweil is much superior to Openbook. Regards, Riana -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Prashanth MN Sent: Wednesday, July 20, 2011 9:15 AM To: [email protected] Subject: [Blind-Computing] suggestion for Optimizing Scan Quality: Hello friends: can anybody share your experienced suggestion for improving scan quality? I am using KURZWEIL 1000 for scanning. The scanner model is HP scanget g2410. At the same time is there any option to scan continuously in OBR? anticipating for your valuable guidance. -- Life is either a daring adventure or nothing. Helen Keller With kind regards: Prashanth MN For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
