So, what would be the easiest or actually most accurate way of cutting a quarter circle out of a sheet of ply? Actually, a half circle will work also. Since the radius of the circle is 3 feet 10.5 inches, diameter of 7 feet 9 inches, this fits nicely into a 4X8 sheet. I have an idea of just making a strip of wood and somehow mounting a jig saw on one end of it. Then driving a nail through the pivot point exactly 3 feet 10.5 inches from the near side of the saw blade and then driving the nail into the sheet somewhere pretty close to dead center near one long edge of the sheet.
Since I don't have a jig saw at the moment I am not sure how easy it will be to mount the shoe of the saw to a strip of wood. Is this the way to do this? Thanks. -- Blue skies. Dan Rossi Carnegie Mellon University. E-Mail: [EMAIL PROTECTED] Tel: (412) 268-9081 To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
