Dan, Depends on what kind of a saw you have available. and whether it's easier to move the saw, the wood or the entire world. but your way sounds best. make sure you get a saw with a shoe that has holes in it for screws to hold the board to it. the board should, perhaps obviously, be long enough to go entirely under the shoe and ride with it. mount the saw to the uncut board, then measure from the actual blade out along the boarrd to where the center will fall.make sure the nail hole in the board is a little large so it can swing without pulling the nail out of the stock. wax the bottom of the boarrd maybe so it'll move easily.
tom To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
