Hello gang I baught a very old air compresser. It works well but the cord is in very sorry shape. Instead of replacing it, the previous owner taped it with electrical tape from stem to stern. My questions are these. first can I just buy a 6 foot three strand grounded cord with a male plug on one end and bare wires on the other end or do I have to buy the cord and the end sepret and put them together? second and more importantly, do I need sighted assistance to wire it to the machine or is there a way to tell which wire is the ground when I install it? I found the two screws for the -plus and minus and the ground clip so I know where they are to be hooked up. also with this kind of cord do I need to make sure that the 2 wires that are not the ground are correct or does it not matter.
To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday The Pod Cast address for the Cooking In The Dark Show is. http://www.gcast.com/u/cookingindark/main.xml Visit The New Blind Handy Man Files Page To Review Contributions From Various List Members At The Following Address: http://www.jaws-users.com/handyman/ Visit the new archives page at the following address http://www.mail-archive.com/[email protected]/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/blindhandyman/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
