Chain, Are you cutting threads by hand or on a lathe? Are you cutting new threads or are you repairing some past sins? Generally any good quality light viscosity oil will do the job unless you are removing a lot of material and dealing with a lot of heat and friction.
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Shane Hecker Sent: Wednesday, March 05, 2008 8:21 PM To: [email protected] Subject: [BlindHandyMan] oils I know that some posts about different types of oil, in particular motor oil, have been posted. My question is what's the difference between an oil that says it's for thread cutting and an oil, say for a chain saw blade and bar? I ask because thread cutting oil is not readily available where I'm at (or at least I don't think it is). I did see some at 1 place, but they wanted $60 or so for a gallon. I don't want to pay that much, so I thought oil for a chain saw blade and bar would work as a substitute, plus it's $7 or so for a gallon at OReilly Auto Parts. Shane To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links -- BEGIN-ANTISPAM-VOTING-LINKS ------------------------------------------------------ Teach InfoWest Spam Trap if this mail (ID 161561592) is spam: Spam: https://spamtrap.infowest.com/canit/b.php?i=161561592&m=5c2a916ef1f6&c=s Not spam: https://spamtrap.infowest.com/canit/b.php?i=161561592&m=5c2a916ef1f6&c=n Forget vote: https://spamtrap.infowest.com/canit/b.php?i=161561592&m=5c2a916ef1f6&c=f ------------------------------------------------------ END-ANTISPAM-VOTING-LINKS
