Automatic Transmission Fluid, any parts house and for your purposes the cheap stuff will work just as well as the high priced spread.
-----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Shane Hecker Sent: Thursday, March 06, 2008 12:10 PM To: [email protected] Subject: Re: [BlindHandyMan] oils Can't say I've heard of ATF. Is that an oil or something else? Where do you get it? Shane ----- Original Message ----- From: Larry Stansifer To: [email protected] Sent: Thursday, March 06, 2008 7:25 AM Subject: RE: [BlindHandyMan] oils And if you are a serious, card carrying, hard core cheep-skate you can use ATF. A quart bottle will probably last a lifetime. -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Kennedy Sent: Thursday, March 06, 2008 3:43 AM To: [email protected] Subject: Re: [BlindHandyMan] oils Usually thread cutting oil is designed to be used on a machine that spins the tap or dye. That will get considerably hotter than cutting threads by hand. Bar oil for a chain saw is very thick so it can cling to the bar and chain. I wouldn't recommend it for thread cutting either because clean up will be a pain. Save your money and use WD40. It has lubricating properties, is light weight like you need and it will help to float the chips out easier. A good dousing before you start and a couple good sprays during the run and that's all you need. Pick you up a couple cans of Brake Cleaner at that auto parts store and you can use that to clean up with when you're finished and you'll be a happy camper. That's assuming you don't have to buy the tools to cut threads with... ----- Original Message ----- From: Shane Hecker To: [email protected] Sent: Wednesday, March 05, 2008 10:21 PM Subject: [BlindHandyMan] oils I know that some posts about different types of oil, in particular motor oil, have been posted. My question is what's the difference between an oil that says it's for thread cutting and an oil, say for a chain saw blade and bar? I ask because thread cutting oil is not readily available where I'm at (or at least I don't think it is). I did see some at 1 place, but they wanted $60 or so for a gallon. I don't want to pay that much, so I thought oil for a chain saw blade and bar would work as a substitute, plus it's $7 or so for a gallon at OReilly Auto Parts. Shane [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links -- ---------------------------------------------------------------------------- -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.21.6/1315 - Release Date: 3/6/2008 9:07 AM [Non-text portions of this message have been removed] To listen to the show archives go to link http://acbradio.org/handyman.html or ftp://ftp.acbradio.org/acbradio-archives/handyman/ The Pod Cast address for the Blind Handy Man Show is. http://www.acbradio.org/news/xml/podcast.php?pgm=saturday Visit The Blind Handy Man Files Page To Review Contributions From Various List Members At The Following address: http://www.jaws-users.com/JAWS/handyman/ Visit the archives page at the following address http://www.mail-archive.com/[email protected]/ If you would like to join the JAWS Users List, then visit the following address for more information: http://www.jaws-users.com/ For a complete list of email commands pertaining to the Blind Handy Man list just send a blank message to: [EMAIL PROTECTED] Yahoo! Groups Links -- BEGIN-ANTISPAM-VOTING-LINKS ------------------------------------------------------ Teach InfoWest Spam Trap if this mail (ID 161714850) is spam: Spam: https://spamtrap.infowest.com/canit/b.php?i=161714850&m=6383c4243183&c=s Not spam: https://spamtrap.infowest.com/canit/b.php?i=161714850&m=6383c4243183&c=n Forget vote: https://spamtrap.infowest.com/canit/b.php?i=161714850&m=6383c4243183&c=f ------------------------------------------------------ END-ANTISPAM-VOTING-LINKS
