If you're talking about the aluminum storm type doors, they have a hinge that runs the entire length. I use WD40 and start at the top. I keep a paper towel under where I'm spraying so it doesn't run everywhere like the floors. If you spray starting at the top and work down the hinge, opening and closing as you go, you can stop the squeaking.
----- Original Message ----- From: [EMAIL PROTECTED] To: [email protected] Sent: Friday, August 22, 2008 3:06 PM Subject: Re: [BlindHandyMan] Storm door lubricatrion was pushbars Spiro's mention of storm doors reminded me that I meant to ask this: WE have three storm doors altogether, and two are associated with a sort of three-seasons room. These two have developped some really loud squeals when the door is opened or closed. There has to be a way of getting a lubricant to the hinge, but there don't seem to be pins that could be extracted. Anybody have experience with this? Thanks. Bill Stephan Kansas Citty MO Email: [EMAIL PROTECTED] Phone: (816)803-2469 ----- Original Message ----- From: [EMAIL PROTECTED] Date: Friday, August 22, 2008 12:58 pm Subject: [BlindHandyMan] pushbars > Hi Folks, I've gotten a few responses on my request for push bars. > They > were in the manner of "me too". > Well, recently a glass and ceramic diamond bit was posted. > That company > technologylk.com > sells loads of things like storm door hardware as well as mirrored > glass > and glass cutters. > They have white powdered aluminum pusbars, set of 3 in aluminum > frame part > dg40 spanning up to 36 inches > and they have vinyl coated, (thin metal) 2 bar kits (maybe in > strictly > vinyl brackets as I bought at ACE hardware a few years ago) > item k5166 is gray and k5167 is white. > I really think I want the dg40. > I'm going back there as they have parts to fix luver mechanisms as > well.Thanks for the post, to the poster, it has had valuable > tangential > results! > > [Non-text portions of this message have been removed]
