You know I may have to try this as well. I tried lythium grease and this just didn't work in the end. I might have to take this apart to see how it works cause so far my glider is making enough noise to wake the dead. What sucks is I rarely sit in it and just moving slightly is enough to produce all sort of noise.
On Aug 24, 2008, at 1:37 AM, [EMAIL PROTECTED] wrote: > goofy maybe, > but I really silicone spray. > We did a quick rub down of a friend's car once; and she said it > looked a > whole lot cleaner. I think I spent 10 mins on it. > I am unsure why you mentioned getting it on the glass; it wipes > glass nice > too. :) > Thanks for the info on the recliner. I got this one for father's day > when > that was finally applicable to me. > > On Fri, 22 Aug 2008, [EMAIL PROTECTED] wrote: > > > OK Spiro, I'll check that out, it sounds like it might be the > ticket. > > > > I just inherited one of those two-piece recliner sets where the > chair is sort of on a glider type mechanism and there's a kind of > otamin (sp) with the same mechanism. This was originally in the > living room but my wife relegated it to my basement domain. > > > > It has a squeak too, and I used WD40 on all the contact points and > sprockets or whatever you'd call them, and it's better, but it's not > quiet by any means. > > > > Bill Stephan > > Kansas Citty MO > > Email: [EMAIL PROTECTED] > > Phone: (816)803-2469 > > > > > > ----- Original Message ----- > > From: [EMAIL PROTECTED] > > Date: Friday, August 22, 2008 3:47 pm > > Subject: Re: [BlindHandyMan] Storm door lubricatrion was pushbars > >> Silicone spray generally comes with a straw. > >> I've gotten that stuff up in the closer pump, and let it run down > >> over > >> that full length hinge on our storm door. it got quiet. > >> > >> What I can't seem to find is how to get the recliner to stop > >> squeaking.Maybe Lenny, or another one of the "good husbands" would > >> know. I was told > >> not to use the silicone and so I left it squeak. :) > >> > >> > >> On Fri, 22 Aug 2008, [EMAIL PROTECTED] wrote: > >> > >>> Spiro's mention of storm doors reminded me that I meant to ask > this: > >>> WE have three storm doors altogether, and two are associated > >> with a sort of three-seasons room. These two have developped some > >> really loud squeals when the door is opened or closed. There has > >> to be a way of getting a lubricant to the hinge, but there don't > >> seem to be pins that could be extracted. Anybody have experience > >> with this? > >>> Thanks. > >>> > >>> > >>> Bill Stephan > >>> Kansas Citty MO > >>> Email: [EMAIL PROTECTED] > >>> Phone: (816)803-2469 > >>> > >>> > >>> ----- Original Message ----- > >>> From: [EMAIL PROTECTED] > >>> Date: Friday, August 22, 2008 12:58 pm > >>> Subject: [BlindHandyMan] pushbars > >>>> Hi Folks, I've gotten a few responses on my request for push > bars. > >>>> They > >>>> were in the manner of "me too". > >>>> Well, recently a glass and ceramic diamond bit was posted. > >>>> That company > >>>> technologylk.com > >>>> sells loads of things like storm door hardware as well as > mirrored > >>>> glass > >>>> and glass cutters. > >>>> They have white powdered aluminum pusbars, set of 3 in aluminum > >>>> frame part > >>>> dg40 spanning up to 36 inches > >>>> and they have vinyl coated, (thin metal) 2 bar kits (maybe in > >>>> strictly > >>>> vinyl brackets as I bought at ACE hardware a few years ago) > >>>> item k5166 is gray and k5167 is white. > >>>> I really think I want the dg40. > >>>> I'm going back there as they have parts to fix luver mechanisms > as > >>>> well.Thanks for the post, to the poster, it has had valuable > >>>> tangential > >>>> results! > >>>> > >>>> > >>> > >> > > > > Scott Howell [EMAIL PROTECTED] [Non-text portions of this message have been removed]
