Your message is full of the greater sign. Do you know what causes that? My screen reader is saying freater greater greater greater greater etc..
From: [email protected] [mailto:[email protected]] On Behalf Of Terry Klarich Sent: Tuesday, June 23, 2009 11:53 AM To: [email protected] Subject: Re: [BlindHandyMan] screw driving and rilling straight On Tue, 23 Jun 2009 09:39:55 -0400you write: > >Hey guys, > >Do you all have good methods for making sure that, when you're using a >power drill or screw driver, you're holding the drill or screw driver >so that the screw or drill bit goes in completely straight and not on >an angle? I've had problems lately (just started using my portable >12V drill extensively) that when I start screwing in a screw, it >sometimes does not go in level. I'm assuming that there has got to be > a better way than using an audible level or drill press. I'm working >on putting together a set of Ikea kitchen cabinets and I'm terrified >that I'll drill at an angle or something and screw myself up >completely. > >I've tried using the screw driver bits with a sleeve screw guidd, and >that seems to help, but what about drilling? Any other ideas? > >All the best. > >Noel I use a 6" square I purchased from Wood Peckers. The square gives me the reference point I need to drill straight. Terry [Non-text portions of this message have been removed]
