RJ, we do have an extra key. I'll have to call the Dodge dealership and see what it's going to cost to replace this key. ----- Original Message ----- From: "RJ" <[email protected]> To: <[email protected]> Sent: Monday, April 05, 2010 7:46 AM Subject: Re: [BlindHandyMan] bent ignition key
>I suggest you get a key made at your dealer's. If you don't have two keys >to work the computer the key will cost about $75 compared to $25 to $35. > RJ > ----- Original Message ----- > From: Brice Mijares > To: [email protected] > Sent: Monday, April 05, 2010 10:37 > Subject: Re: [BlindHandyMan] bent ignition key > > > > I don't think it's all that easy as walking in to any hardware store and > having a key made. I believe there is a chip in the key that will allow > the > motor to start and won't start without this chip. That's why I was hopeful > I could get it straighthen. > ----- Original Message ----- > From: "Bob Kennedy" <[email protected]> > To: <[email protected]> > Sent: Sunday, April 04, 2010 3:06 PM > Subject: Re: [BlindHandyMan] bent ignition key > >> Before they cut the replacement key they can measure the key and set the >> numbers into the cutter and never have to do anything else to the bent >> key. They have a gauge that gives the combination of the teeth. >> ----- Original Message ----- >> From: Dale Leavens >> To: [email protected] >> Sent: Sunday, April 04, 2010 5:45 PM >> Subject: Re: [BlindHandyMan] bent ignition key >> >> >> >> Won't he have to straighten it before it can be traced with the copier? >> Unless of course he gets the use of the other key. >> >> The other problem with straightening an instrument like a key is that the >> convex side of the bend is now longer. >> When you straighten it the concave side lengthens. Depending on where the >> bend happens it might offset the teeth enough that they no longer engage >> the tumblers accurately. >> >> Keys like that too tend to be brittle as you already pointed out. >> >> If I was Han Solo I'd probably pet my wookie >> ----- Original Message ----- >> From: Bob Kennedy >> To: [email protected] >> Sent: Sunday, April 04, 2010 5:31 PM >> Subject: Re: [BlindHandyMan] bent ignition key >> >> If it's just the unlock key and not the ignition key, I wouldn't mess >> with >> a lock smith. >> >> Just take it to any of the box stores and let them make a copy for you. >> Any time you bend metal and then bend it back it is weakened and you run >> the risk of breaking it off in the cylinder. Much more of a problem then. >> ----- Original Message ----- >> From: Brice Mijares >> To: [email protected] >> Sent: Sunday, April 04, 2010 5:23 PM >> Subject: [BlindHandyMan] bent ignition key >> >> A couple months ago I had my keys hanging off my belt loop and must have >> bumped into something pretty hard because the car key was bent nearly to >> a >> 45 degree angle. It's one of those keys that you can lock or unlock the >> car >> with. Can a lock smith straiten one of these keys out? >> >> __________ Information from ESET Smart Security, version of virus >> signature database 4999 (20100404) __________ >> >> The message was checked by ESET Smart Security. >> >> http://www.eset.com >> >> [Non-text portions of this message have been removed] >> >> [Non-text portions of this message have been removed] >> >> >> >> >> >> [Non-text portions of this message have been removed] >> >> >> >> >> __________ Information from ESET Smart Security, version of virus >> signature database 4999 (20100404) __________ >> >> The message was checked by ESET Smart Security. >> >> http://www.eset.com >> >> > > __________ Information from ESET Smart Security, version of virus > signature database 4999 (20100404) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > > > > > [Non-text portions of this message have been removed] > > > > > __________ Information from ESET Smart Security, version of virus > signature database 4999 (20100404) __________ > > The message was checked by ESET Smart Security. > > http://www.eset.com > > __________ Information from ESET Smart Security, version of virus signature database 4999 (20100404) __________ The message was checked by ESET Smart Security. http://www.eset.com
