Thank you Alex. No, the one you described is similar to the one that is already on the unit. I am looking for the bag that was talked about last fall and it would hold 2 devices on edge and there were 5 zippered pockets and 2 pockets that went down the full depth of the case.
Where did you see the case you describe? Have a good day, Paul ----- Original Message ----- If I have the right case, it has: * velcrow (?) pannels on each side, one mor access to the on/off switch and all that, and one for access to the PCMCIA slot. * On BN models, holes in the front allow one to use the thumb keys when the unit is in the case. * A large pannel with a zipper pocket folds up the back, over the top, down over the thumb keys, and a bit under to fasten with more velcrow. (This makes the pocket only good for media cards and other small and/or flat objects, as they press down on the unit.) * The back pannel of the flip up cover is also velcrow, so that a GPS pouch can be put on. It has holes cut in it for access to the AC adapter port and serial port (classic), and the AC adapter, serial, and both USB host ports (mPower). Hope that was the right case. Alex ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
