Yes, have tried all the resets and some not mentioned at various times.
Rose Combs [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stacey Robinson Sent: Sunday, July 09, 2006 4:58 AM To: Braillenote List Subject: RE: [Braillenote] 7.01 Upgrade Question Rose, Have you tried the upgrade by pressing dots 4 6 with the reset and then dots 1 2with no reset and then dots 4 5 with a reset? I'm using a qt but I believe thatis the sequence I used. Give that a shot. It surely could not make things any worse. Stacey and Chesley > ----- Original Message ----- >From: "Rose Combs" <[EMAIL PROTECTED] >To: "'Braillenote List'" <[email protected] >Date: Sun, 9 Jul 2006 01:48:13 -0700 >Subject: RE: [Braillenote] 7.01 Upgrade Question >If that is so, how come I am still getting errors on two cards I definitely >ran the prepare utility on, one which I had used last spring to get the 7.0 >upgrade before I knew it would be mailed, and one just out of its package, >and run on the prepare utility. All three cards are readable on the BN as >well as the computer? >Yes, I know, I am bugging you Jonathan , but I am not the only person having >my problems. I still have a hunch it relates to something that did not go >right with the bootloader, as nothing happened when I installed 7 and used >the 1-2 with the reset button as the instructions on the web site and in my >package later seemed to tell me to do. >Anyone else having the problems, especially the SD card error, did you also >have a problem with the boot file in January or whenever you did 7. At the >time since the installation went without a hitch I thought nothing of it but >hindsight tells me this may be where the problem could exist. I am not a >programmer, just tossing it out there to see if maybe I can intuit my way to >helping get a solution--as this seems to be something I have done in the >past at work and at home. >It may be worth a though at least. >Rose Combs >[EMAIL PROTECTED] >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of Jonathan Mosen >Sent: Saturday, July 08, 2006 2:41 PM >To: 'Braillenote List' >Subject: RE: [Braillenote] 7.01 Upgrade Question >Hi Jim, I suspect that what has happened in this case is that you received a >card that was, in fact, not prepared correctly. HumanWare did send a bunch >of these out and we apologise for this. When the unit goes dead like that, >it suggests that the SD card is formatted with FAT 32, not FAT 16 as is >necessary. We did post a message about this when we discovered the error a >few months back, but if you had already installed, it may not have been >important to you at the time. So if you run the Prepare SD card for upgrade >utility on this card, you should find it works just fine. Hope this helps. >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
