Brandon, please read your manual carefully, before giving
information. Yes, once per year, you need to do as you
suggested. However, this is what the manual says:
2.9 Braille Display Care.
Each cell of the Braille display has eight pins. For each pin
there is a special crystal that lifts the pin to make a dot, and
allows the pin to drop when there is no dot. The pins have to be
able to move freely. In normal use dirt unavoidably accumulates
on the display and around the touch cursor buttons. To prevent
the pins from jamming, the display and touch cursor should be
cleaned regularly. Cleaning the Braille display is not
straightforward. We recommend that you send the BrailleNote BT
back to an authorized BrailleNote BT service center every twelve
months to clean the Braille display.
Making sure that your hands are always clean is a good start
towards minimizing problems with your Braille display. We
suggest that once per week you wipe the surface of the Braille
display using a soft damp cloth. The cloth should be squeezed
hard to ensure that all excess moisture has been removed. Use
only warm water on the cloth.
----- Original Message -----
From: "Brandon armstrong" <[EMAIL PROTECTED]
To: "Braillenote List" <[email protected]
Date sent: Sat, 7 Oct 2006 12:37:02 -0500
Subject: Re: [Braillenote] Braille cells on the M-Power QT
Display
hello, in order to have your display cleaned, you'll have to send
it back to
humanware to have it cleaned.
The manual says not to try and clean the braille display your
self.
Brandon
----- Original Message -----
From: "Jose Lomeli" <[EMAIL PROTECTED]
To: "Braillenote List" <[email protected]
Sent: Friday, October 06, 2006 5:32 PM
Subject: re: [Braillenote] Braille cells on the M-Power QT
Display
Hello; Kathleen, Yes I have experienced this. I don't know if
my display
needs cleaning. My MPower is new not a transplant. This goes
to the
list. How could I clean my braille display? Please write back.
Jose Lomeli. Long Beach California.
----- Original Message -----
From: kathleen spear <[EMAIL PROTECTED]
To: [email protected]
Date sent: Sat, 07 Oct 2006 09:50:15 -0700
Subject: [Braillenote] Braille cells on the M-Power QT Display
Hello everyone, this is KC Spear.
As some of you know, when using my BN M-Power, I rely entirely on
braille. I know some of you use both braille and speech.
Logically, you don't use your braille display for reading and
editing as much as I do.
My point is that, with the BN Classic, I only had to ask for
1-cell replacemnt. That was done in 2005, when I sent the BN in
for a "Transplant." I'm going to need to send the M-Power
back, because several cells are missing dots. Has anyone else
experienced a problem with the M-Power cells? (I admit to being
surprised, because I understood these cells are supposedly better
than the ones in the Classic.)
KC
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
Outgoing mail is Virus Scanned byNorman Data Defense.
Inbound Spam
reduced 98.2% byVircom Sieve.
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
___
To leave the BrailleNote list, send a blank message to
[EMAIL PROTECTED]
To view the list archives or change your preferences, visit
http://list.humanware.com/mailman/listinfo/braillenote
