When you were setting up the connection, after filling in the user name and password, did you go on down through the configuration setup and change the wait for dial tone to no? Vicky Collins [EMAIL PROTECTED]
----- Original Message ----- From: "Tom Lange" <[EMAIL PROTECTED]> To: "BrailleNote List" <[email protected]> Sent: Monday, January 14, 2008 10:00 PM Subject: [Braillenote] BN and Cingular Revisited Hi, Since I was able to get unlimited Internet access with Cingular a couple of days ago, I followed the procedure shown below for setting up my BN MPower and my 6682. The procedure, provided on the list by Kevin Chao, is as follows. > This is for people who are trying to use a Cingular cell phone as their > modem with their BrailleNote. I would recommend switching to computer > braille if you are using a BT by pressing BACKSPACE with J at each field, > not required for QT models or if you have your default keyboard entry > grade set to computer braille. Below hte instrucitons, I will have the key > combination for different characters discussed. > > 1. From the Main Menu, Press SPACE with O (FN with O) for Options > 2. Press C for connectivity menu > 3. Press C to create a new dial-up or lan connection > 4. connection configuration name: wap.cingular > 5. device to use, press SPACE with dots 3-4 (CTRL with SPACE) until you > get to phone > 6. phone number: *99***1# > 7. service user name: [EMAIL PROTECTED] > 8. password: cingular1 > Leave hte rest as its default, press SPACE with E (ESCAPE), you will be > asked to confirm changes, press Y for yes. Okay, I followed the procedure to the letter, except that instead of entering wap.cingular as my configuration name, I simply called it wap. So here's the deal. I've got the 6682 paired with the braille Note. When I go into Keyweb, type a web address and select the appropriate connection configuration, the phone beeps and a bluetooth window pops up, and I press the joystick on the phone in to clear the dialog. After a pause, I get a message on the BN saying that the system cannot find the port. Make sure that the modem is connected. It seems to be, as I checked under bluetooth and it shows the 6682 as paired and active. At other times when I do this, there's just a long pause, followed by the same message. Evidently I've screwed up somewhere here but I have no clue what I did wrong. Any ideas? . Thanks, Tom ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote ___ Replies to this message will go directly to the sender. If your reply would be useful to the list, please send a copy to the list as well. To leave the BrailleNote list, send a blank message to [EMAIL PROTECTED] To view the list archives or change your preferences, visit http://list.humanware.com/mailman/listinfo/braillenote
