Hello! I think you have your margins set reasonably well. I would change the length to 32 rather than 33. If you are going to punch or bind this document, set left margin on the blazer to 2 and set the BN for 30 spaces. Make sure your top of form is set properly as well. If that is set too far down on the page, you will emboss on the perferation. One can tap the buttons which move the paper back and forth and each time this is done, the top of form is changed. The BN will govern the page length and width. Make certain the margins are set properly in your BN. Go into the lay out menu and turn page numbering on. The Blazer should emboss them properly.
Check your page settings in the BN Make certain your page settings reflect the page length and width you would like to have. If the dots are weak at the margin and are better towards the end of the line, the Blazer may need to go in for servicing. The embossing should be quite uniform across the line. HTH Jim Aldrich > ----- Original Message ----- >From: Josh Kennedy <[EMAIL PROTECTED] >To: [EMAIL PROTECTED] >Date: Sat, 14 Feb 2004 15:03:53 -0500 (EST) >Subject: [Braillenote] braille blazer and braille note problems >Hi, >I have a braille note with the new motherboard, keysoft5 with Duxbury >translator. I'm having a problem embossing. First of all when the braille >blazer embosses the dots are light on the left side of the page and get >heavier as they go over. Second, after each page the braille blazer skips a >page. It also is printing on the perferations. >How should I have the forward translation options set? I tried changing some >of them with no effect. >Here are my braille blazer settings. Actually it's my friend's braille >blazer, not mine. My braille note settings are: >page length 25, page width 33 page offset 2 wordrap on. page numbering on >with numbers brailled at top right. Also, do I have to translate the .txt >file to a .brl or .brf file before telling it to emboss page numbers? or can >the emboss option automatically add page numbers to the .txt file? Can a .doc >file be translated into grade two braille and brailled? Ok, now here are the >blazer's settings: >port parallel, paper feed push-out, left margin zero, right margin 34, top >margin 0 and bottom is zero also. Page length is zero. paper length 11, auto >linefeed off braille six dot, label mode off. Graphics mode is turned off. >I'm trying to print a 210 page satellite television channel listing for my >friend so he can reference it when he needs to. Also, the top cap to the >button on the blazer came off and it looks like the cap is about to fall >apart. Is the braille blazer the cheapest braille embosser that he can get? >Thanks for your help >Josh >___ >To leave the BrailleNote list, send a blank message to >[EMAIL PROTECTED] >To view the list archives or change your preferences, visit >http://list.pulsedata.com/mailman/listinfo/braillenote
