Dennis, You can check the following link on how the PID and TC live together. http://s888.photobucket.com/albums/ac81/igorsh/Brewtus%20Mods/?action=view¤t=IMG_8595Large. We have already modified 3 Silvias and this Brewtus using Fuji PID and I found it to be very easy to work with. Regarding Brewtus setup: Stock temperature controller is set to 99 deg C and its offset is pushed to -10. ( I have pictures at the above link showing it) That effectively set TC to push temperature to 109 deg C. As a result, there should be no interference with PID ( assuming PID is set below 228 deg F) You may be right about T-type, but the one that I installed has a range of 0 to 400 deg F and fits nicely in the existing thermowell. It was also a freebee from the PID seller.
I have also a picture at the above link showing different pumps side by side for folks who are interested. --Igor --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/brewtus?hl=en -~----------~----~----~----~------~----~------~--~---
