hmmm...how would the switch lie--would it simply bypass the temp probe that tells the brain what temp is? I.e. is the temp probe connected to something that closes above 163, then opens when it's below, such that the switch could go into place ahead of that and be opened/closed to mimic the other part?
tx, bmc On Oct 20, 2010, at 10:31 AM, Ira wrote: > At 09:31 AM 10/20/2010, you wrote: >> >>>> Is there a way to override the Hottop's requirement to cool itself to >> >>>> 163F after a batch before beginning to climb again for a second batch? >> >>>> I use a much higher charge temp than that, and it takes forEVER to get >> >>>> down and back up to temp. > > If I wanted to solve that problem I'd put in a switch that lied to the > controller about the temperature. Flip so you can press start and then flip > it back and you should be good. > > Ira > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
