That was me and Ira was a real help . The sensor is in the box. The new meter will indeed show you the overshoot which can be considerable and might lead to a bit of surfing on your part. I have a machine with a PID now and don't notice too much improvement in the quality of the shots. But I also notice no sink shots either.
On Tue, Jan 18, 2011 at 10:20 AM, Ira <[email protected]> wrote: > Actually I believe that comes with a new sensor in the box so you should be > good to go. If you install the new one, you will have to go through setup as > the one I helped install came set for a freezer and so would never turn on > the heater. Also it shows overshoot so you will have a better idea of > what''s going on in the boiler. > > Ira > > > At 10:02 AM 1/18/2011, you wrote: > >> Worse it will not fix the problem. >> >> On Jan 18, 10:16 am, HERMAN <[email protected]> wrote: >> > i just checked and they sent me the thermostat part number ako-13120/01 >> instead >> > of the thermocouple! >> > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]<brewtus%[email protected]> > . > For more options, visit this group at > http://groups.google.com/group/brewtus?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
