Worse it will not fix the problem.

On Jan 18, 10:16 am, HERMAN <[email protected]> wrote:
> i just checked and they sent me the thermostat part number ako-13120/01 
> instead
> of the thermocouple!
>
> ________________________________
> From: Jet Pilot <[email protected]>
> To: Brewtus <[email protected]>
> Sent: Mon, January 17, 2011 5:54:08 PM
> Subject: Re: E1 on power up
>
> E1 code on the AKO-13120/01 PID thermostat means either a shorted or
> an open circuit in the temp sensor on the brew boiler, so it has
> nothing to do with the pressure stat, which is on the steam boiler
> anyways.
>
> Since you were still getting hot water out of your brew boiler, your
> sensor likely failed to the "call for heat" mode.  My boiler was luke
> warm, like TWG's, so mine probably failed to the "turn off the heat"
> mode.  The AKO-14901 NTC thermocouple is "proprietary" to AKO's
> thermostats, i.e., they claim the thermostat won't work without the
> specific thermocouple, although I'm willing to bet that if I could get
> the specs on the thermocouple I could find a suitable "after-market"
> version that would work just fine.
>
> I just wanted my good old Brewtus to work again.  I don't need PID, so
> I couldn't see spending $235.74, plus shipping, plus the effort to
> install the new thermostat, relay, and thermowell to simply replace a
> thermocouple that merely required disconnecting 2 wires, removing the
> old sensor and installing the new one.  To me that's like buying a new
> desk lamp to replace a burned out lightbulb.
>
> --
> You received this message because you are subscribed to the Google Groups
> "Brewtus" group.
> To post to this group, send email to [email protected].
> To unsubscribe from this group, send email to
> [email protected].
> For more options, visit this group 
> athttp://groups.google.com/group/brewtus?hl=en.

-- 
You received this message because you are subscribed to the Google Groups 
"Brewtus" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/brewtus?hl=en.

Reply via email to