My new $50 portafilter is identical to the original portafilter that comes with Brewtus III. No need to change the gasket. Rancillio portafilters are slightly different, and they are not safe to use with gasket that comes with Brewtus. According to previous posts, gasket needs to be changed to 8mm to use the Rancillio portafilter.
Regards Miroslav On May 17, 6:24 am, Miroslav Stankovic <[email protected]> wrote: > I have ordered new portafilter from Seatle Coffee Gear, and will > change the gasket to 8 mm. > My previous portafilter was locking at 6:30, or 7, and yep - what a > mess. > > Thank you > > Miroslav > > On May 15, 10:41 am, Dennis Keating <[email protected]> > wrote: > > > > > On 5/14/2011 7:48 PM, AngerManagement wrote: > > > > I use standard E61 PF etc and then turned teh bottom out... > > > > Regardless of teh Naked status... > > > > The question should be about what other PF will fit. > > > > I have two that I use and one has lugs @ 3 and 9 and the other is > > > offset. Tried 3 before I found one that fitted exactly and then made > > > it Nakid :-) > > > > Never had a blow off yet. > > > > Anger. > > > > On May 15, 12:51 am, Miroslav Stankovic<[email protected]> wrote: > > >> I bought the same Rancilio naked portafilter from Chris Coffee, but > > >> portafilter would wiggle out during the extraction, and make > > >> unimaginable mess in the kitchen. After three such episodes, I gave > > >> the portafilter away to friend who recently bought Rancillio. > > >> Comparing holders on the portafilters (small side wings), they are > > >> shorter and cut at different angle compared to the Brewtus original. > > > >> Regards > > > >> Miroslav > > > >> On Apr 14, 7:03 pm, runtmms<[email protected]> wrote: > > > >>> I have a Rancilio that locks at about 5:15. I'm using it in a Brewtus > > >>> I. I got it from Chris' Coffee many years ago, so I don't know what > > >>> might have changed. > > >>> -Merlynn > > >>> On Apr 13, 10:54 am, "StevieG."<[email protected]> wrote: > > >>>> Hi Folks - nakedportafilterquestion... after changing my screen/ > > >>>> gasket, the naked PF that I use really doesnt fit at all. It didnt > > >>>> have much travel to lock before, and I need a different one. > > >>>> Can anyone suggest a good naked PF with a double and triple basket, > > >>>> that will travel further right than the 6:00 position when loaded? > > >>>> Thanks Much! > > >>>> Steve- Hide quoted text - > > >>> - Show quoted text - > > > hello, i been useing the LM bottomless for a long time now. i also > > have an LM spouted that i liked before this one. it will hold your > > triple baskets, too. anyways, to use these you need to change to a > > thinner grouphead gasket for them to lock down good. -Dennis- Hide quoted > > text - > > > - Show quoted text -- Hide quoted text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
