I have ordered new portafilter from Seatle Coffee Gear, and will change the gasket to 8 mm. My previous portafilter was locking at 6:30, or 7, and yep - what a mess.
Thank you Miroslav On May 15, 10:41 am, Dennis Keating <[email protected]> wrote: > On 5/14/2011 7:48 PM, AngerManagement wrote: > > > > > I use standard E61 PF etc and then turned teh bottom out... > > > Regardless of teh Naked status... > > > The question should be about what other PF will fit. > > > I have two that I use and one has lugs @ 3 and 9 and the other is > > offset. Tried 3 before I found one that fitted exactly and then made > > it Nakid :-) > > > Never had a blow off yet. > > > Anger. > > > On May 15, 12:51 am, Miroslav Stankovic<[email protected]> wrote: > >> I bought the same Rancilio naked portafilter from Chris Coffee, but > >> portafilter would wiggle out during the extraction, and make > >> unimaginable mess in the kitchen. After three such episodes, I gave > >> the portafilter away to friend who recently bought Rancillio. > >> Comparing holders on the portafilters (small side wings), they are > >> shorter and cut at different angle compared to the Brewtus original. > > >> Regards > > >> Miroslav > > >> On Apr 14, 7:03 pm, runtmms<[email protected]> wrote: > > >>> I have a Rancilio that locks at about 5:15. I'm using it in a Brewtus > >>> I. I got it from Chris' Coffee many years ago, so I don't know what > >>> might have changed. > >>> -Merlynn > >>> On Apr 13, 10:54 am, "StevieG."<[email protected]> wrote: > >>>> Hi Folks - nakedportafilterquestion... after changing my screen/ > >>>> gasket, the naked PF that I use really doesnt fit at all. It didnt > >>>> have much travel to lock before, and I need a different one. > >>>> Can anyone suggest a good naked PF with a double and triple basket, > >>>> that will travel further right than the 6:00 position when loaded? > >>>> Thanks Much! > >>>> Steve- Hide quoted text - > >>> - Show quoted text - > > hello, i been useing the LM bottomless for a long time now. i also > have an LM spouted that i liked before this one. it will hold your > triple baskets, too. anyways, to use these you need to change to a > thinner grouphead gasket for them to lock down good. -Dennis- Hide quoted > text - > > - Show quoted text - -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
