Hi Ira, I had searched the forum and found your advice from 2008 for checking the water level sensor, that I did yesterday and all seemed fine, after not autofilling I followed previous instructions and it filled, drained and filled with the sensor hooked up. So I sent a big thanks to you!
So as I never purge my steam boiler thought I'd do it again today, Turned on, and made a coffee, then switched off and opened hot water spout till drained. Turned on and steam boiler didn't fill. So I opened her up and disconnected the water level sensor (single wire). Turned on and nothing. Still no filling so I checked the wire for any earthing back to the control unit, all fine, tried several times with wire grounded and not, still no action. In the end gave up and put it back together, turned on one last hopeful time and the steam boiler filled up. Strange! Can the control unit be on its way out? is it easy to get hold of, do you have any more tests I could perform? I have a multimeter. I have this Biii on all day every day from 8 - 6 ish. Thanks, Mike UK. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To view this discussion on the web visit https://groups.google.com/d/msg/brewtus/-/WmL51kwj7boJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
