All heat cycles work fine, steam calls and heats while brew is calling for heat. To answer directly, switch on, steam light comes on, temp control comes on with dot signifying call for heat. After it filled last time I ran hot water with unit on, steam boiler drained and never filled again. On Nov 30, 2012 9:44 PM, "Ira" <[email protected]> wrote:
> At 04:18 AM 11/30/2012, you wrote: > >> Hi Ira, >> >> I had searched the forum and found your advice from 2008 for checking the >> water level sensor, that I did yesterday and all seemed fine, after not >> autofilling I followed previous instructions and it filled, drained and >> filled with the sensor hooked up. So I sent a big thanks to you! >> >> So as I never purge my steam boiler thought I'd do it again today, Turned >> on, and made a coffee, then switched off and opened hot water spout till >> drained. Turned on and steam boiler didn't fill. So I opened her up and >> disconnected the water level sensor (single wire). Turned on and nothing. >> Still no filling so I checked the wire for any earthing back to the >> control unit, all fine, tried several times with wire grounded and not, >> still no action. In the end gave up and put it back together, turned on one >> last hopeful time and the steam boiler filled up. Strange! >> >> Can the control unit be on its way out? is it easy to get hold of, do you >> have any more tests I could perform? I have a multimeter. I have this Biii >> on all day every day from 8 - 6 ish. >> > > So I guess we get to troubleshoot. > > When the boiler doesn't fill, do the lights turn on when you flip the > switch? If so, which lights turn on? > > Ira > > > > > -- > You received this message because you are subscribed to the Google Groups > "Brewtus" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to brewtus+unsubscribe@** > googlegroups.com <brewtus%[email protected]>. > For more options, visit this group at http://groups.google.com/** > group/brewtus?hl=en <http://groups.google.com/group/brewtus?hl=en>. > > -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/brewtus?hl=en.
